| Slant Six Forum https://slantsix.org/forum/ |
|
| breaded line back lines https://slantsix.org/forum/viewtopic.php?t=46652 |
Page 1 of 1 |
| Author: | stolan83 [ Fri Oct 14, 2011 1:40 pm ] |
| Post subject: | breaded line back lines |
I am almost done installing my kh disc converstion but hit a road block. I need the flex lines. Do I make the hard lines longer and use the lines I have now or is there a longer flex line? |
|
| Author: | Pierre [ Fri Oct 14, 2011 2:59 pm ] |
| Post subject: | |
What's wrong with using the stock replacement KH hoses? |
|
| Author: | stolan83 [ Sat Oct 15, 2011 11:15 am ] |
| Post subject: | |
Did not know there was kh lines. Does anyone know a part number or supplier |
|
| Author: | Pierre [ Sat Oct 15, 2011 11:21 am ] |
| Post subject: | |
Try rockauto.com if you don't have any local parts stores around you. |
|
| Author: | stolan83 [ Tue Oct 18, 2011 8:03 am ] |
| Post subject: | |
I know that this might be a stupid questions but do I ask the parts store for a kh brake line and try to explain to a bunch of chevy and ford people what i am looking for. I have the two part version with the hub and rotor, not sure what year it came from. I would love a history lesson |
|
| Author: | Pierre [ Tue Oct 18, 2011 11:20 am ] |
| Post subject: | |
What is it going on? I know the kh setup was used through 72 on a bodies, I'm not certain of start year, maybe 68? So if you asked for a 70 duster disc brake hose you would get the right one. |
|
| Author: | stolan83 [ Tue Oct 18, 2011 10:56 pm ] |
| Post subject: | |
I have a 67 dart 270 that had 9" drums to start. Thank I ordered a set from rockauto. Thanks for the info and if I am missing anything else I will ask. It has taken me about 8 years to get to were I am and I don't have the time nore the money to make mistake anymore |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|