| Slant Six Forum https://slantsix.org/forum/ |
|
| Pushbutton Parking Brake Cable Removal https://slantsix.org/forum/viewtopic.php?t=46687 |
Page 1 of 1 |
| Author: | armyofchuckness [ Mon Oct 17, 2011 7:01 am ] |
| Post subject: | Pushbutton Parking Brake Cable Removal |
Hey, everyone! I've started my big disassembly on my '64 and I hit a little snag. The parking brake cable part of the pushbutton unit is held in place with a cotter pit and a crimped bit of metal as seen in this picture. Anyone have any experience taking these apart? I know the obvious solution is to force it open, but I don't want to damage anything if I don't have to. Any help would be greatly appreciated. Thanks! 
|
|
| Author: | Doc [ Mon Oct 17, 2011 9:27 am ] |
| Post subject: | |
Remove the cable from the transmission... DD 
|
|
| Author: | armyofchuckness [ Mon Oct 17, 2011 10:45 am ] |
| Post subject: | |
Thanks, Doc! That would do the job for now at least. I actually have a different pushbutton system to replace mine, so I will have to force that part out eventually, though. The new one has much nicer buttons and a backup light switch. |
|
| Author: | armyofchuckness [ Mon Oct 17, 2011 6:56 pm ] |
| Post subject: | |
So, it turns out you just bend it a little. It went better than expected. Thanks again for your help! I'll definitely keep it in mind when detaching the cable from the other side. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|