| Slant Six Forum https://slantsix.org/forum/ |
|
| Nitti just went 6.94 in the 1/8 https://slantsix.org/forum/viewtopic.php?t=46749 |
Page 1 of 2 |
| Author: | Hemidup [ Sat Oct 22, 2011 12:46 pm ] |
| Post subject: | Nitti just went 6.94 in the 1/8 |
Sould put him in the high 10's in the 1/4. |
|
| Author: | Rick Covalt [ Sat Oct 22, 2011 2:34 pm ] |
| Post subject: | Cool |
Hope someone has some video |
|
| Author: | Exner Geek [ Sun Oct 23, 2011 7:14 am ] |
| Post subject: | |
I can see some potential here with my fellow end of the season racers. We will schedule a special record setting event, maybe at Cedar Falls, IA. It wll be easy for Steve Nitti, Ryan Peterson (Turbo 66 Valiant). Slantzilla, and me to get there. Rob can sell calendars to raise tow money for Guzzi and Terry Littlejohn. Rob can't say he is coming but if he actully shows up he can run. |
|
| Author: | Rob Simmons [ Sun Oct 23, 2011 7:35 am ] |
| Post subject: | |
Quote: Rob can sell calendars to raise tow money for Guzzi and Terry Littlejohn. Rob can't say he is coming but if he actully shows up he can run.
Oh my goodness!  Could it be that Seymour is getting into the silly banter that many of us enjoy???  Awesome!!  I will do my very very best to have the Challenger ready with the new engine by the time the racing season starts next year. I'm FOCUSED on graduating from being a "Poser" to becoming a "Real Racer" like you and Mark!
|
|
| Author: | slantzilla [ Sun Oct 23, 2011 8:32 am ] |
| Post subject: | |
Who is Nitti? 
|
|
| Author: | terrylittlejohn [ Sun Oct 23, 2011 5:34 pm ] |
| Post subject: | |
it will have to wait until june, i only hit a 7.30et 1/8th, my front brakes were draging. i never discover it until last weekend,i could fix them on the ferry ride across the gulf, 
|
|
| Author: | Hemidup [ Sun Oct 23, 2011 11:25 pm ] |
| Post subject: | |
Clip of one of his runs from yesterday. http://www.youtube.com/watch?v=N2AwfMkl ... er&list=UL. |
|
| Author: | Exner Geek [ Mon Oct 24, 2011 6:44 am ] |
| Post subject: | |
To Slantzilla: I will tell you about Nitti if you tell us about Cornholio. |
|
| Author: | Rust collector [ Mon Oct 24, 2011 8:38 am ] |
| Post subject: | |
|
|
| Author: | Hemidup [ Mon Oct 24, 2011 4:21 pm ] |
| Post subject: | |
Trying to get Nitti to invest in a trans brake over the winter. Would love to see what this car could do leaving off boost with a relaxed suspension. |
|
| Author: | 1974duster kev [ Mon Oct 24, 2011 4:35 pm ] |
| Post subject: | |
The supercharger sounds coolio, what kinda cam and compression in that motor? Kev |
|
| Author: | turbo66valiant [ Thu Oct 27, 2011 8:21 pm ] |
| Post subject: | |
Very nice!!! |
|
| Author: | Greg Ondayko [ Tue Nov 08, 2011 4:51 pm ] |
| Post subject: | Steve's Duster in Car Craft |
Steve's Duster Mentioned here in this thread Is featured in the latest issue of car craft.. Sorry No Link as it's not up on the carcraft website. It might be the December or january Issue as the Subscribers get them eariler than the newsstand.... Anyway it's the Issue with a red Mustang on the cover reading Build this XXXX for under $7000 Always Nice to see a National Magazine put a slant in their pages.. Congrats Steve and Shardon Performance! Greg |
|
| Author: | USAJon [ Mon Nov 14, 2011 4:17 pm ] |
| Post subject: | |
I wonder how tight that engine was glued together..sounds a tad 2tight on specs.. |
|
| Author: | terrylittlejohn [ Sat Nov 26, 2011 3:51 pm ] |
| Post subject: | |
just got the carcraft mag,long run on the ferry to be delivered here  love those dusters.would love for you to talk a little more about the build.what timing are you running at 20psi, what size water injectors are you using, what are cam spec`s,what convertor stall and shift point, rear gearing, do you have the larger pulley on your electric water pump. could go on but you get my interest. need more
|
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|