Will start showing pics of what I have been doing
HAPPY NEW YEAR !!!!!
| Slant Six Forum https://slantsix.org/forum/ |
|
| Guzzi car pics. https://slantsix.org/forum/viewtopic.php?t=47421 |
Page 1 of 5 |
| Author: | madmax/6 [ Sat Dec 31, 2011 3:49 pm ] |
| Post subject: | Guzzi car pics. |
Will start showing pics of what I have been doing HAPPY NEW YEAR !!!!! |
|
| Author: | Greg Ondayko [ Sat Dec 31, 2011 6:23 pm ] |
| Post subject: | |
Looking Good Mark!.. How Do you get your lexan to bend at such a severe angle / radius for you windshield? I love it.. I cant cut into much of Ruster's structure yet until I get me a roll cage. Greg |
|
| Author: | GTS225 [ Sat Dec 31, 2011 6:51 pm ] |
| Post subject: | |
I'm not real big on the "Toad" car's styling, but that's a personal preferance. I gotta say, Mark, I am diggin' the hell out of what you've done with that car, especially the hood treatment. What is that.....white-painted, expanded steel? Lots of detail attention there, too. Individual panels on the dash cutouts and cowl grill, quite a bit of swiss-cheese treatment, both underhood and in the door jambs. I'm not too sure what you're doing with the combination of louvers and swiss-cheese treatment, though. Is that a flow-through ventilation system, or does it relieve internal air pressure buildup? Care to explain the "extra" panels on the doors and roof? It looks like you may have cut out the steel there, in favor of lighter weight aluminum. Maybe it's just me being lazy, but that seems to be quite a bit for a small weight savings. Roger |
|
| Author: | madmax/6 [ Sat Dec 31, 2011 7:42 pm ] |
| Post subject: | |
Expandend aluminum on hood.Louvers to relieve air pressure,,,,flow tru.Back of trunk panel has lots of holes.Cut openings under fins above tail lights so i get no build up of air trapped in trunk.The aluminum panels on one side took two days,got about 6lbs out.Will bee painted black after I am done.Now I gotta do it all over again on the other side.My nitrous system with trans blanket is adding about 40lbs ,so I am trying to pull 40more lbs out so I can go for the A nitrious record.Roof will get two more aluminum panels,that will get about 2 more lbs out,probably 4 hrs work.Yep, I am sick.Then I am cutting tops of fenders and replaceing steel with more aluminum.Mark |
|
| Author: | madmax/6 [ Sat Dec 31, 2011 7:51 pm ] |
| Post subject: | |
And I have done the math on my car,,72 lbs loss is worth a 10th.Na.I just like wacking off my car.Am concerend when I cant whack off anymore.Maybee my eye sight will get better, Mark |
|
| Author: | VDART [ Sun Jan 01, 2012 4:53 am ] |
| Post subject: | |
since your already sick-- I've heard of drilling out non structural bolts for this type of diet, I think he netted 12 lbs . car was a stock type class racer b body mopar. Lawrence |
|
| Author: | wvenable [ Sun Jan 01, 2012 6:22 am ] |
| Post subject: | |
Wow - incredible craftsmanship. What is next titanium pieces parts? Mark, before the next big race - diet, shave your entire body,  and get a colonic. The only thing left would be to have a medicine man perform some sort of ritual.
|
|
| Author: | GTS225 [ Sun Jan 01, 2012 9:29 am ] |
| Post subject: | |
OK.....from the pics it kinda looked like that was the idea, if one assumed you did the treatment to the back half as well. Quote: Will bee painted black after I am done.
Pssst!....Hey Mark.....paint adds weight.  Quote: My nitrous system with trans blanket is adding about 40lbs ,so I am trying to pull 40more lbs out so I can go for the A nitrious record.
Ok.....trading the weight of car for the weight of power adders. Quite reasonable for a drag car.Quote: Yep, I am sick.
Sick?......Naaaa....maybe a bit of OCD. You have a goal, and are striving to accomplish what needs to be done to reach it. Good luck with the record-setting. It's probably gonna feel good to read your own name in an official racing document.I may have to borrow that hood treatment idea, though. I think it would look good on a street car, if done right. Roger |
|
| Author: | madmax/6 [ Tue Jan 03, 2012 6:45 pm ] |
| Post subject: | |
Front fender before...........   Front fender treatment..............finished. Sicko even shaved down the rivet heads.   
|
|
| Author: | Fopar [ Tue Jan 03, 2012 8:35 pm ] |
| Post subject: | |
Mark are you trying to build an Aluminum A body?? Richard |
|
| Author: | madmax/6 [ Tue Jan 03, 2012 9:46 pm ] |
| Post subject: | |
Richard,Yes,cause I will never bee as old or light as your boney ass.I keep thinking about haveing you make a pass in my car because of your lightweightness,but then I am afraid the quickness of my car might cause you a heart attack....and I will never forget my first ever run down the track at Vegas when you beat me and stuck your tongue out at me.Yea,I was in the SANDSTONE stock car then.Mark |
|
| Author: | madmax/6 [ Tue Jan 03, 2012 9:59 pm ] |
| Post subject: | |
And 6 hours of work on the top of that fender i only lost 2.5 lbs,I can lose more than that with a good poop.Now I gotta do the other side.Mark |
|
| Author: | raPoM [ Tue Jan 03, 2012 10:26 pm ] |
| Post subject: | |
Quote: Mark are you trying to build an Aluminum A body??
Thats the ticket Richard  No need for an aluminum head,just need an aluminum body!!! 
|
|
| Author: | Fopar [ Tue Jan 03, 2012 10:56 pm ] |
| Post subject: | |
Mark I know you wouldn't let me drive your car because then I would hold the record, not you just your car.  Richard |
|
| Author: | Dart270 [ Wed Jan 04, 2012 5:41 pm ] |
| Post subject: | |
Dude, I'm drooling again. Can I come visit you on either the weekend of March 24 or 31?? I'm serious... Maybe I can learn a few things. Lou |
|
| Page 1 of 5 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|