| Slant Six Forum https://slantsix.org/forum/ |
|
| slant-6 v8 tranny adapter https://slantsix.org/forum/viewtopic.php?t=47578 |
Page 1 of 1 |
| Author: | Mike_64_Valiant [ Sat Jan 14, 2012 7:59 am ] |
| Post subject: | slant-6 v8 tranny adapter |
I have one sitting in the shop and dont really have a need for it, I decided to go with a T-5 and made an adapter for that. My question is what are the measurements I need to know to figure out if it was large hub or small hub register. And are they all large pilot input holes? Whats a fair asking price? I know they are heavy so shipping is going to be high. |
|
| Author: | Dart270 [ Sat Jan 14, 2012 9:10 am ] |
| Post subject: | |
It should be small hub, since they only made the plates up to '67 and '68 was first year for big hub. Mine is small hub. I lathed out the ID of the foreward end of the flex plate adapter ring to fit my big hub crank. FYI, the small hub is 1.555" ID (in crank) and the big hub is 1.815" ID. These are off the top of my head, and am pretty sure they're right. Big hub for sure. Lou |
|
| Author: | terrylittlejohn [ Sat Jan 14, 2012 6:33 pm ] |
| Post subject: | |
any way to get a template made and mailed? |
|
| Author: | Mike_64_Valiant [ Tue Jan 17, 2012 4:49 pm ] |
| Post subject: | |
I have had a couple requests for pictures and measurements I will see what I can do. It may be a week or two really swamped with work and family house projects. |
|
| Author: | terrylittlejohn [ Tue Jan 17, 2012 6:16 pm ] |
| Post subject: | |
thanks |
|
| Author: | Stoopid john [ Fri Feb 03, 2012 8:56 pm ] |
| Post subject: | |
I sent a PM john |
|
| Author: | greasmnky [ Sun Feb 12, 2012 4:44 pm ] |
| Post subject: | |
The large hub adapter was also available well into the 70's ,our brand new 75 B100, /6, 3 speed, optional 11" clutch, used an adapter for the V8 bell housing with a low starter mount . |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|