Where are you? If you're within driving distance of Chicago I have one I'll give you. (170ci)
| Slant Six Forum https://slantsix.org/forum/ |
|
| Finding a Slant Six https://slantsix.org/forum/viewtopic.php?t=4791 |
Page 1 of 1 |
| Author: | Fran [ Sun Jan 12, 2003 12:05 pm ] |
| Post subject: | Finding a Slant Six |
I am getting more serious about replacing the original engine in my 36 Dodge with a slant six. Other than the local junk yards, are there any remanufacturing businessess that I can get one from? This being my first project, I need as much opinion and info as you can muster. Thank you. Sifua@aol.com or sifua@adelphia,net |
|
| Author: | slantzilla [ Sun Jan 12, 2003 8:13 pm ] |
| Post subject: | |
Where are you? If you're within driving distance of Chicago I have one I'll give you. (170ci)
|
|
| Author: | Doctor Dodge [ Sun Jan 12, 2003 10:36 pm ] |
| Post subject: | |
If you are on the West coast, I have a few Slant "cores" I can part with. Call around, ask people, put out the word for a SL6 and you will find one. Don't pay too much, (if anything) the Slant is a pretty common engine and most guys pull them out for V8 swaps. Lets face it, Mopar made over 12 million Slant Six engines over a 36 year period so they are around. DD |
|
| Author: | Fran [ Mon Jan 13, 2003 5:53 pm ] |
| Post subject: | Finding a slant 6 |
Thanks guys, I'm in the state of "Mass". |
|
| Author: | slantzilla [ Mon Jan 13, 2003 6:30 pm ] |
| Post subject: | |
Not exactly driving distance from Chicago, huh? 
|
|
| Author: | Doctor Dodge [ Mon Jan 13, 2003 7:27 pm ] |
| Post subject: | Calif. Core, No Rust... |
I should have known.  DD |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|