I checked my valve adjustment after 3000 miles on my rebuilt head. All adjustments were within .001 of spec (010/020). I initially set the exhaust lash at .021, so things look good. The car runs great, has good power and gets good gas mileage. However, I did find one bent pushrod. Does anyone make pushrods for the slant?

Thanks

Mitch

Smith Brothers, Clifford and others make push rods for the /6. For stock stuff, I'd suggest starting with good 'ol NAPA.

Gilly

That's just what I did. I ordered Clevite pushrods from NAPA online.

Thanks

Mitch