| Slant Six Forum https://slantsix.org/forum/ |
|
| fel pro compressed head gasket thickness https://slantsix.org/forum/viewtopic.php?t=48246 |
Page 1 of 1 |
| Author: | DadTruck [ Mon Mar 19, 2012 7:56 pm ] |
| Post subject: | fel pro compressed head gasket thickness |
called the Fel Pro Tech line to get the manufacturers numbers on their 791861 standard head gasket. compressed gasket thickness .036 free gasket thickness .041 fire ring diameter 3.520 |
|
| Author: | Dart270 [ Tue Mar 20, 2012 5:50 am ] |
| Post subject: | |
They are pretty close. I measure slightly different numbers: 0.033-0.035" compressed thickness (at 85-90 ft-lbs bolt torque) 3.500-3.510" ID Yes, I have measured this on several motors/gaskets. Lou |
|
| Author: | kielbasa [ Tue Mar 20, 2012 7:39 am ] |
| Post subject: | |
I'm so stupid. Should have measured old gasket. But the id, I measured 3.5240 on this new one |
|
| Author: | Dart270 [ Wed Mar 21, 2012 2:42 am ] |
| Post subject: | |
My measurements have gone from the early 90s to maybe 5 yrs ago, so there could be minor changes on the newer gaskets. Lou |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|