| Slant Six Forum https://slantsix.org/forum/ |
|
| slant six to 360?? https://slantsix.org/forum/viewtopic.php?t=48650 |
Page 1 of 1 |
| Author: | 84aspende [ Thu Apr 26, 2012 4:35 pm ] |
| Post subject: | slant six to 360?? |
ok i have seen some say you can use some kinda motor mount's but then i read you have to swap k frames , thank's for any info my car is a 1980 dodge aspen 4 door and i just want to give it some more get up and go, don't need a 10s car out it just to fight off some buddys ford vic's ,,,ill be keeping the stock sant six to restore the car some day as it was my grand mothers car nd she passed away and left it to me. |
|
| Author: | hantayo13 [ Thu Apr 26, 2012 5:06 pm ] |
| Post subject: | |
with the right build you can beat alot of v-8s..it isi a lot of work to put a v-8 in a slant car....and personaly I like beating 'em and when you pop hood and they see the leaning tower of power///they are peeved and amazed .... keep and build the slant |
|
| Author: | 84aspende [ Thu Apr 26, 2012 6:41 pm ] |
| Post subject: | a |
well maybe some day but when you have a v6 camaro and a inline six supra you gota have one v8 ,but the old slant needs to be redone and over the years thats what will happen for now ill just put the 360 in ,any help is thanks |
|
| Author: | mopar_nocar [ Thu Apr 26, 2012 7:56 pm ] |
| Post subject: | |
Google is your friend. I BET this is not the right board to come to about swapping out a slant. sb |
|
| Author: | Mroldfart2u [ Thu Apr 26, 2012 8:04 pm ] |
| Post subject: | Re: slant six to 360?? |
Quote: ok i have seen some say you can use some kinda motor mount's but then i read you have to swap k frames , thank's for any info my car is a 1980 dodge aspen 4 door and i just want to give it some more get up and go, don't need a 10s car out it just to fight off some buddys ford vic's ,,,ill be keeping the stock sant six to restore the car some day as it was my grand mothers car nd she passed away and left it to me.
Third item down on this page...
|
|
| Author: | Mroldfart2u [ Thu Apr 26, 2012 8:07 pm ] |
| Post subject: | |
Quote: Google is your friend. I BET this is not the right board to come to about swapping out a slant.
Yes you do have a valid point, but ya learn when and where you can.... I would have given him the site of another forum to check, but thats kind of taboo also...
sb |
|
| Author: | 84aspende [ Fri Apr 27, 2012 6:18 am ] |
| Post subject: | k |
im not giveing up on my slant i was asking about the k frame cause i want to swap in the 360 and then some day when i can find parts put in a nice redone slant six,see were i am at in the usa there is 0 slant six motor's or ppl doing them at all ,seeing a v8 mopar is geting rare at even a car show,i thank you for any of your help sorry if i buged you with my posting this and im in good old usa laurel ,delaware |
|
| Author: | Mroldfart2u [ Fri Apr 27, 2012 6:31 am ] |
| Post subject: | Re: k |
Quote: im not giveing up on my slant i was asking about the k frame cause i want to swap in the 360 and then some day when i can find parts put in a nice redone slant six,see were i am at in the usa there is 0 slant six motor's or ppl doing them at all ,seeing a v8 mopar is geting rare at even a car show,i thank you for any of your help sorry if i buged you with my posting this and im in good old usa laurel ,delaware
That is not a problem, the mounts that are in the link allow you to keep /6 K and install the aforementioned LA V-8. So it can be "undone" when the time comes for original leaning tower of power to go back in.
|
|
| Author: | 84aspende [ Fri Apr 27, 2012 6:40 am ] |
| Post subject: | |
one last ? the car im pulling parts from its a 1977 chager daytona what all dodge body parts will fit i know f and m or the same is j and a the same like k frame and stuff like that chassis parts |
|
| Author: | Mroldfart2u [ Fri Apr 27, 2012 7:56 am ] |
| Post subject: | |
Quote: one last ? the car im pulling parts from its a 1977 chager daytona
I am not for sure exactly, but Here might have the answers to those questions.
what all dodge body parts will fit i know f and m or the same is j and a the same like k frame and stuff like that chassis parts |
|
| Author: | radarsonwheels [ Sat Apr 28, 2012 5:18 am ] |
| Post subject: | |
Look up schumacher creative services they make what you need |
|
| Author: | hantayo13 [ Sat Apr 28, 2012 5:46 am ] |
| Post subject: | |
it is a lot easier to put v8 into the chevy than the mopar |
|
| Author: | 84aspende [ Sat Apr 28, 2012 6:14 pm ] |
| Post subject: | hahahah |
were's the like button |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|