| Slant Six Forum https://slantsix.org/forum/ |
|
| super six trans kickdown https://slantsix.org/forum/viewtopic.php?t=48815 |
Page 1 of 1 |
| Author: | dcarpkc [ Tue May 15, 2012 9:16 am ] |
| Post subject: | super six trans kickdown |
I got my two barrel manifold and Holley 8891 carb installed. Got a carter choke thermostat from rockauto and it works perfectly. Now for the kickdown linkage. The linkage is from a 78 Volarie. I am not sure what will be reqiired for springs etc. Also in question is where the kickdown slider attaches. Anybody got any pictures? I am in the dark on this as the doner car carb was removed. I got everything related to the kickdown except springs and spring brackets. |
|
| Author: | Reed [ Tue May 15, 2012 9:50 am ] |
| Post subject: | |
See HERE |
|
| Author: | dcarpkc [ Tue May 15, 2012 2:18 pm ] |
| Post subject: | linkage |
Thx Reed, I had seemn this article in the past and could not renember where. This clears up all my questuons. I will be crusing about 16 degrees off plumb soon.[/quote] |
|
| Author: | dcarpkc [ Tue May 15, 2012 2:24 pm ] |
| Post subject: | kickdown |
Sorry, 30 degrees off plumb :shrug: :shrug: |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|