| Slant Six Forum https://slantsix.org/forum/ |
|
| Dual Exhaust & F-bodies https://slantsix.org/forum/viewtopic.php?t=48978 |
Page 1 of 1 |
| Author: | aspen76 [ Sun Jun 03, 2012 8:33 am ] |
| Post subject: | Dual Exhaust & F-bodies |
Hey guys, I've been doing some research to see what my options are for dual exhaust. The majority of things I was able to find were dutras, Clifford, and hookers. I did however, find an article or two talking about spitfire headers. Are these/were these available? Discussion of them seem to drop off around 2008. I also wanted to ask which of the above mentioned header/dual set ups would work for F-bodies. I believe I have a high starter (read that for the most part trucks were the only slants with a low starter position). Can't really find anything that says any of them won't fit an F body, just wanted to confirm. I'm most likely going to go with the dutra set up if I can purchase an already modified exhaust manifold because I don't know how nor have the tools to weld but I'd like to be sure of all my options. Thanks for all your help, Aspen76 |
|
| Author: | hantayo13 [ Sun Jun 03, 2012 8:44 am ] |
| Post subject: | |
check with doug....he might have modifed rear also...he is great to deal with |
|
| Author: | Wesola78 [ Tue Jun 05, 2012 5:19 pm ] |
| Post subject: | |
I have an F-body, '78 Volare, and I've had Dutra Duals on it for years. They work great, and they last. If this is a street driven car, I say go for Dutra Duals. |
|
| Author: | Fatcuda [ Sun Jul 08, 2012 7:42 pm ] |
| Post subject: | |
How do you get ahold of Doug? I have left him three emails with no response |
|
| Author: | Fopar [ Sun Jul 08, 2012 8:24 pm ] |
| Post subject: | |
Try "Doc" he has 2 screen names. Richard |
|
| Author: | Augie Dog [ Fri Jul 20, 2012 10:27 am ] |
| Post subject: | |
I'm with fatcuda on trying to get a hold of Doug. I used his contact e-mail from his web site and no response. I have an 87 D-100 I would like to put headers on and I like the dutra's |
|
| Author: | Doc [ Fri Jul 20, 2012 11:55 am ] |
| Post subject: | |
Contact me here for the fastest responce... Truth is, life is real busy these days so I don't check all my different home email accounts as often as I should.  I do have some manifolds available and can make-up rear sections as needed. In fact, I just shipped a front Dutra manifold out to Fatcuda... DD |
|
| Author: | Fatcuda [ Fri Jul 20, 2012 6:50 pm ] |
| Post subject: | |
I received my front manifold today. It looks good, thank you Doug |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|