ok???So...what was it?
| Slant Six Forum https://slantsix.org/forum/ |
|
| Funny thing happened on the way to valve lash adjustment https://slantsix.org/forum/viewtopic.php?t=49133 |
Page 1 of 2 |
| Author: | krytellan [ Mon Jun 25, 2012 3:18 pm ] |
| Post subject: | Funny thing happened on the way to valve lash adjustment |
Oh man. I was just doing a valve lash adjustment and something bad happened. It's not my first time doing it, maybe 4th or so, but after some minor adjustments to the 1st and 2nd cylinder exhaust valves, I started hearing pinging and clanking going on inside the engine. I'm not sure what it means and it scares me profusely. It's now constant and I'm afraid to fire it back up. If I remember correctly, it started while loosening the exhaust valve on cylinder 2. If anyone can help and tell me what I have just done I would appreciate it. |
|
| Author: | krytellan [ Mon Jun 25, 2012 7:31 pm ] |
| Post subject: | |
Nevermind. Problem solved. |
|
| Author: | Rust collector [ Mon Jun 25, 2012 7:36 pm ] |
| Post subject: | |
| ok??? So...what was it? |
|
| Author: | 63gtcv [ Thu Jun 28, 2012 5:31 pm ] |
| Post subject: | |
HEY YOU.... you can't just leave us hanging like a bad episode of Dallas. You GOTTA let us in on you're vast new knowledge. Please. |
|
| Author: | ValiantBoyWonder [ Sun Jul 01, 2012 9:39 am ] |
| Post subject: | |
if it makes you feel any less embarrassed i accidentally dropped my zippo into the engine bay, it rode the k member down and sat, open, lit, under the oil pan. quiet scary. good lighter though. i keep a fire extinguisher in the car. |
|
| Author: | Reed [ Sun Jul 01, 2012 9:42 am ] |
| Post subject: | |
Once, while adjusting the valves on my brother's van, I dropped the 3/8 wrench into the running motor. Talk about a sphincter puckering moment.  Fortunately, the design of the slant six is such that a wrench dropped into the lifter gallery will most likely just make scary noises but not cause any damage.
|
|
| Author: | Rug_Trucker [ Sun Jul 01, 2012 10:27 am ] |
| Post subject: | |
Quote: HEY YOU.... you can't just leave us hanging like a bad episode of Dallas. You GOTTA let us in on you're vast new knowledge. Please.
I feel cheated, violated, .................. 
|
|
| Author: | walpolla [ Sun Jul 01, 2012 4:55 pm ] |
| Post subject: | |
Hello, krytellan, I have a friend who happens to live in Detroit, and enjoys getting information from reluctant people. Is it OK for him to call and meet with you tomorrow? regards,Rod  P.S: 2 things, we would all like to know what the problem with your engine was and here is a picture of my friend so you will recognise him when he meets you. 
|
|
| Author: | hantayo13 [ Sun Jul 01, 2012 6:45 pm ] |
| Post subject: | |
I can arrange for a few hunred bikers to join him also.....best just to fest up and tell us |
|
| Author: | ceej [ Sun Jul 01, 2012 6:49 pm ] |
| Post subject: | |
Geeze guys. Now he has to admit the 3/8" socket fell off his rachet, and that was making all the noise! How embarrassing! What I like is when I get too close to the rocker next to the one I'm working and scrub all the skin off my knuckles.  CJ |
|
| Author: | Doc [ Mon Jul 02, 2012 9:13 am ] |
| Post subject: | |
I can't count how many times I have been adjusting the #1 rockers and somehow manage to touch one of the alternator diodes or "hot" post with my grounded wrench... hey, it's getting close to the 4th of July... I see sparks!  DD |
|
| Author: | Greg Ondayko [ Mon Jul 02, 2012 11:50 am ] |
| Post subject: | |
I have always tried to idiot-proof my tools when doing a lash adjustment. I use a Long extension on the 3/8" ratchet which keeps it away from the back of the alternator and I use some old scraps of old household solid electrical wire wrapped around the ratchet handle, extension and Tape the 3/8" socket to the extension so it does not fall into the engine.. Of course doing valve 'justments on lumpy cammed race type motors is where these extremes are needed. docile stock stuff that will idle smoothly @ 650 rpms is easy.. krytellan, Love the '80 F body Wagon. It does not appear to be a sport wagon is it? Greg |
|
| Author: | Mroldfart2u [ Mon Jul 02, 2012 12:23 pm ] |
| Post subject: | |
Quote: HEY YOU.... you can't just leave us hanging like a bad episode of Dallas. You GOTTA let us in on you're vast new knowledge. Please.
Well @ least we KNOW who shot JR.... [/b]
|
|
| Author: | Greg Ondayko [ Mon Jul 02, 2012 12:45 pm ] |
| Post subject: | |
Quote: Quote: HEY YOU.... you can't just leave us hanging like a bad episode of Dallas. You GOTTA let us in on you're vast new knowledge. Please.
Well @ least we KNOW who shot JR.... [/b]Must be a texas thing...who cares who shot who best thing about dallas was the old cars and the theme song.... da da da da da dat dat da da da da da dat dat daaaaaaaaaaaaaaaaa.. Greg |
|
| Author: | Rust collector [ Thu Jul 05, 2012 6:34 am ] |
| Post subject: | |
Quote:
*snip snip* and the theme song.... da da da da da dat dat da da
uh, isn't that the star wars theme? da da da dat dat daaaaaaaaaaaaaaaaa.. Greg 
|
|
| Page 1 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|