| Slant Six Forum https://slantsix.org/forum/ |
|
| 1985 power ram clutch linkage https://slantsix.org/forum/viewtopic.php?t=49366 |
Page 1 of 1 |
| Author: | Garrett [ Fri Jul 20, 2012 6:09 pm ] |
| Post subject: | 1985 power ram clutch linkage |
I have a 1985 power ram with a slant six standard 4x4 and im having trouble finding new or used clutch rods and linkage was just wondering if anyone knew of a supplier cause i ended up dropping a 360 4bbl with an a727 into it but id love to have the old 6 in a row back in it, also i was wondering what kinda mods i could do to the motor ive already put supersix manifolds on it and a 2280 holley on it but was wondering if a 4160 4bbl and new manifold would make much of a difference in an increase in mileage and over all power, any help would be greatly appreciated |
|
| Author: | DusterIdiot [ Fri Jul 20, 2012 6:40 pm ] |
| Post subject: | Which transmission? |
Did it have the NP435 tranny or the A-833OD 3 speed? I know where there is a NP-435 slant six 80's truck I was going to make a salvage visit on, and the linkage is still all there.... -D.Idiot |
|
| Author: | Garrett [ Fri Jul 20, 2012 7:04 pm ] |
| Post subject: | |
its the np435 but the problem is i live in ontario canada so im gonna assume shipping would cost an arm and a leg |
|
| Author: | DusterIdiot [ Fri Jul 20, 2012 9:30 pm ] |
| Post subject: | LOL...yep... |
Yep...not too long back the Canadian Post office went on strike, and that really goofed things up for a while too.. I hear you there. -D.Idiot |
|
| Author: | Garrett [ Sat Jul 21, 2012 7:31 am ] |
| Post subject: | |
ya and i cant find a local scrap yard that has one most of the trucks have been long since crushed. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|