| Slant Six Forum https://slantsix.org/forum/ |
|
| pertronix replacement rotor? https://slantsix.org/forum/viewtopic.php?t=49848 |
Page 1 of 1 |
| Author: | Ed Mullen [ Wed Sep 19, 2012 5:31 pm ] |
| Post subject: | pertronix replacement rotor? |
I've found the question asked, but not answered: Can I buy a spare, or is it only available as a warranty replacement thing? |
|
| Author: | 69a100 [ Thu Sep 20, 2012 2:26 pm ] |
| Post subject: | |
If I remember right, it's a sleeve that fits over the standard stock type rotor. It's been awhile since i've been inside mine to recall. |
|
| Author: | 63gtcv [ Thu Sep 20, 2012 5:45 pm ] |
| Post subject: | |
I had to replace one years ago but I had the same problem. I finally bought one from pertronix. Never did find out what application it really is. That would be good info. for all who use it. |
|
| Author: | crickhollow [ Fri Sep 21, 2012 4:25 am ] |
| Post subject: | |
Yes, you can buy a spare - they cost about $10, but you need to supply the model of the kit you have. Peter |
|
| Author: | Ed Mullen [ Fri Sep 21, 2012 9:23 am ] |
| Post subject: | |
Quote: If I remember right, it's a sleeve that fits over the standard stock type rotor.
That's what I thought (until I opened the box).Thanks for all the responses. I'll contact Pertronix. (if it was once a sleeve, and it changed to a proprietary rotor, I'll ask and see if I can get a sleeve instead. I'd rather use a MO-3000), and post what i find. |
|
| Author: | Ed Mullen [ Fri Sep 21, 2012 7:17 pm ] |
| Post subject: | |
So I'm an idiot. It's just a sleeve over a regular rotor. (Plastic same color, and my eyes are bad.) |
|
| Author: | 65Dodge100 [ Sun Sep 23, 2012 6:02 am ] |
| Post subject: | |
It's different for each application. Some have a sleeve, some don't. Danny |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|