Slant Six Forum
https://slantsix.org/forum/

Engine Tips?
https://slantsix.org/forum/viewtopic.php?t=49936
Page 1 of 1

Author:  DartDude [ Sun Sep 30, 2012 8:08 am ]
Post subject:  Engine Tips?

I am building up a 225 in a 1972 dart swinger and I was going to put a 2 barrel Holley 2300 350 cfm on it and tips or ideas?? I also need a back seat for the car too if anyone has any ideas on that ![/img]

Author:  Aggressive Ted [ Sun Sep 30, 2012 8:48 am ]
Post subject: 

Check out some of the engine builds under "Frequently Asked Questions (FAQ) - Engine"

More compression and a recurved distributor is the best bang for the buck!

Author:  WagonsRcool [ Sun Sep 30, 2012 11:56 am ]
Post subject: 

Better exhaust system- either 2 1/4" from a stock manifold, or possibly Dutra Duals into a 2 1/2" system; with a FREE flowing muffler into a tailpipe one size smaller.

Author:  1974duster kev [ Sun Sep 30, 2012 6:47 pm ]
Post subject: 

cheap way for some more compression is cut the head signifcant power gain for less than 100bucks depending on your machine shop

Kev

Author:  wjajr [ Mon Oct 01, 2012 5:22 am ]
Post subject: 

Wise ass department:
Quote:
Engine Tips?
Yup, about 30 degrees…

Welcome to the board.

Bill

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/