| Slant Six Forum https://slantsix.org/forum/ |
|
| HEI power supply source options https://slantsix.org/forum/viewtopic.php?t=49963 |
Page 1 of 1 |
| Author: | SlantSteve [ Tue Oct 02, 2012 5:15 pm ] |
| Post subject: | HEI power supply source options |
Hi guys,Just curious....Im about to wire up my HEI conversion.I will use a relay for the power supply of course,but in your experiences what have you found to be the preferred source....the "Bat" terminal on the Alternator would be the neatest option for me,but would a source closer to the battery provide a cleaner source of power for the module? Is the hei module even that fussy? I was also thinking of using a ferrite choke on the power supply to keep noise down.Would be very interested to hear the experiences of other members and their HEI conversions.Thanks,Steve |
|
| Author: | mcnoople [ Tue Oct 02, 2012 6:08 pm ] |
| Post subject: | |
Yes, the battery terminal on the alternator is a good choice. Read the sticky at the top of this forum it is very in depth on the conversion. |
|
| Author: | SlantSteve [ Tue Oct 02, 2012 7:25 pm ] |
| Post subject: | |
Thanks for the reply, yep, read the sticky about the install, was just curious to hear fro first hand experience if there had been any issues or preferences now a few guys have done this conversion. Thanks! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|