I have a stocker on my motor, and it's pretty much as you described. A Fisher or Fluidamper would be better, but on a street motor you end up with pulley alignment problems.
| Slant Six Forum https://slantsix.org/forum/ |
|
| Harmonic Balancer https://slantsix.org/forum/viewtopic.php?t=5011 |
Page 1 of 1 |
| Author: | cycledog [ Sat Feb 15, 2003 9:23 pm ] |
| Post subject: | Harmonic Balancer |
I haven't seen any talk about harmonic balancers. Seems that it would be most critical on 6 what with a long crank. Does anyone have a favorite or would a stock one do on a mildly modified engine? Mild meaning, head work, mild cam, headers, manifold carb, etc. etc. |
|
| Author: | slantzilla [ Sun Feb 16, 2003 5:30 am ] |
| Post subject: | |
I have a stocker on my motor, and it's pretty much as you described. A Fisher or Fluidamper would be better, but on a street motor you end up with pulley alignment problems.
|
|
| Author: | Will [ Sun Feb 16, 2003 6:43 am ] |
| Post subject: | |
You are going to have to make the change...........stock ones tend to slip........then add nos?????????? Will |
|
| Author: | Dart270 [ Sun Feb 16, 2003 12:05 pm ] |
| Post subject: | |
The really fast guys (in the 10s) I've talked to use either Fisher or ATI dampers, and say the fluid-type dampers are junk. You can use a BB Chrysler damper. Lou |
|
| Author: | Doctor Dodge [ Sun Feb 16, 2003 9:56 pm ] |
| Post subject: | |
I use the Fisher damper on my dragcar, it is the same as the Bb Mopar and it sticks out aways from the t. chain cover, that was until I faced-off some of the hub, now it tucks right up to the cover. As noted, the real pain is repositioning all the pulleys, a factory SL6 damper has the V belt groove right in the damper ring, none of the aftermarket ones have that so all the grooves have to be moved forward. DD |
|
| Author: | TIM*LIGHTFOOT [ Wed Nov 12, 2003 3:01 pm ] |
| Post subject: | Harmoic Damper |
HEY THERE GUYS, THIS IS TIM FROM FISHER DAMPERS. WE HAVE A NEW DAMPER THE FITS IN THE STOCK LOCATION , PULLEYS LINE UP. WE MADE A COUPLE OF THEM THAT WERE OFF ABOUT .200 ,BUT NOW WE HAVE THE CORRECT ALINMENT . NOT ON ARE WEB SITE YET BUT WE DO HAVE THEM WWW.FISHERCONCEPTS.COM |
|
| Author: | Slant Cecil [ Wed Nov 12, 2003 8:54 pm ] |
| Post subject: | |
I'm not sure Fluidamper is still around, not that I would buy one, they are heavy. Cecil |
|
| Author: | gmader [ Thu Nov 13, 2003 8:35 am ] |
| Post subject: | So, how would I purchase a Fisher Concepts damper? |
Hi Tim, I looked at your website, and I cannot tell the price or how to order a damper from you. Can you give us a price? Thanks, Greg |
|
| Author: | Slant Cecil [ Thu Nov 13, 2003 9:00 am ] |
| Post subject: | |
Tim listed the price at $295 in the 'Zilla Killa engine build' thread. Cecil |
|
| Author: | TIM*LIGHTFOOT [ Thu Nov 13, 2003 12:30 pm ] |
| Post subject: | Harmonic Damperhow To Buy |
WELL .$295.00 IS OUR LETS SAY 5 PRICE, RETAIL $431.00 JOBBER $325 TO ORDER JUST E-MAIL ME AT FISHERCON1@AOL.COM / WITH NAME, ADDRESS, AND PHONE NUMBER, THEN WE WILL CONTACT YOU TO GET ALL OTHER INFO. AND GIVE YOU A ORDER# SO WE CAN TRACK ORDER IN HOUSE, THANKS TIM LIGHTFOOT@FISHERS |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|