I am rebuilding a 904 for my project and need some advice. I need to know what parts are best to use. I have a couple of /6 transmissions from 63-64, a v8 transmission from -64 and can get me a couple of v8 transmissions from 66 and up. What parts fit together in a /6 case from 63-64? What parts are best to use?
I also have a Transgo 2 kit that will go in the transmission.

The project is a /6 with EFI and turbo, nothing extreme just something that has a bit more kick to it than stock, maybe 250-300HP.

_________________
Dart GT -64
Dart 270 -63
Chevy Silverado -86
GMC Vandura -87

Use the forward drum, 2 gear band and front pump from the V 8 trans.
Look for and use a 3.8 or 4.2 ratio kickdown lever.
DD

Thanks Doc for the info.

Now for my next question:
Where and what rebuild parts do I buy? I have been searching the web and there seems to be a lot of different kits to buy. Do I even buy a kit? or do I buy each individual part separatly? What to do to get most out of my money?

_________________
Dart GT -64
Dart 270 -63
Chevy Silverado -86
GMC Vandura -87