| Slant Six Forum https://slantsix.org/forum/ |
|
| Slant 6 push rods https://slantsix.org/forum/viewtopic.php?t=50260 |
Page 1 of 1 |
| Author: | crickhollow [ Tue Nov 06, 2012 3:00 am ] |
| Post subject: | Slant 6 push rods |
My Slant 6 has 4 VERY bent push rods, possibly as the valves are stuck - the engine had not been running for many years. Where can I buy new push rods? Thanks, Peter |
|
| Author: | Charrlie_S [ Tue Nov 06, 2012 4:01 am ] |
| Post subject: | |
Any auto parts store should be able to get them for you. Sealed Power number RP3036 or Melling mpr152 for the 198 or 225 engine. Or you can order online. For a 170 engine the Melling number is MPR154, but limited availability. Also used ones are available from site members. |
|
| Author: | SlantSixDan [ Tue Nov 06, 2012 8:46 am ] |
| Post subject: | |
Make sure you get the correct pushrods; they're different if you're running a hydraulic-lifter engine. |
|
| Author: | Charrlie_S [ Tue Nov 06, 2012 10:47 am ] |
| Post subject: | |
Quote: Make sure you get the correct pushrods; they're different if you're running a hydraulic-lifter engine.
True, I keep forgetting about those engines.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|