| Slant Six Forum https://slantsix.org/forum/ |
|
| Vacuum Diagram: 1980 slant https://slantsix.org/forum/viewtopic.php?t=50387 |
Page 1 of 1 |
| Author: | duval67 [ Thu Nov 22, 2012 11:51 am ] |
| Post subject: | Vacuum Diagram: 1980 slant |
Hey guys, I'm looking for a vacuum diagram for my slant six. It is running just fine aside from a bog down on acceleration which I'm attributing to a vacuum leak. So if anyone has a diagram, that would be excellent. It's in a Dodge d150 if that makes any difference. Thanks in advance fellas! |
|
| Author: | Aggressive Ted [ Thu Nov 22, 2012 12:11 pm ] |
| Post subject: | |
here is a partial listing of a few.... SMP cans have had the following ink stamps compared to part numbers: AH-6 VC-184 1973-74-8.5R can AH-7 VC-185 1973-74-8.5R can AH-11 VC-239 Super Six 11x can AH-12 VC-208 Feather Duster 11x can Vacuum can specs Number: Start Max VC-93: 4.9" - 7" / 5.25° @ 13" - 7.5° VC-173: 7" / 5.3° @ 10" - 7.8° VC-184: 7" / 7° @ 11.5" - 10.5° Number: Start Max VC-185: 9" / 7° @ 15.5" - 10° 8.5X stamped on arm VC-208: 6" / 10° @ 9" - 11" - 12° 11X stamped on arm VC-239: 7" / 7° @ 11.5" - 10° 11X stamped on arm VC-244: 9" / 7.5° @ 6" - 8" - 9.5° Here is my table of VC208 data (Fri Aug 22, 2008 1:38 pm) ________________________________________ Here is my table of VC208 data: Number of turns "unscrewed" ……………in. Hg over which advance is applied ……….0…………………………………………………… 1 - 5 ……….1 ……………………………………………………1 - 7 ……….2…………………………………………………... 3 - 7 ……….3………………………………………………….. 4 - 11 ……….4………………………………………………….. 5 - 11 ……….5 …………………………………………………5.5 - 12 ……….6 …………………………………………………..7 - 13 See how unscrewing it makes it come in later, but the base range is nearly constant? Hope this helps.... |
|
| Author: | DusterIdiot [ Thu Nov 22, 2012 1:02 pm ] |
| Post subject: | Diagram not Diaphragm... |
He's looking for the emissions and hose hook ups for all the spaghetti under the hood. It sounds like the underhood sticker is missing, in which case you are going to need a factory manual for the truck.... -D.Idiot |
|
| Author: | Aggressive Ted [ Thu Nov 22, 2012 1:09 pm ] |
| Post subject: | |
opps.....sorry, need new glasses bad.....missed the spelling. Too many eye surgeries this year..... |
|
| Author: | duval67 [ Thu Nov 22, 2012 3:13 pm ] |
| Post subject: | |
Haha no worries. I do need the information you posted as well, Ted, so thanks! I seem to remember the Haynes manual not having a vacuum diagram...I'll have to look again. |
|
| Author: | 64ragtop [ Thu Nov 22, 2012 9:24 pm ] |
| Post subject: | |
Go here first: http://u225.torque.net/haynes_instructions.html Then try: http://www.moparmanuals.com/mopar/downl ... atalog.pdf Or: http://www.diyrepairmanuals.com/index.html I use and like the first source I listed. There are others. I've got the busted knuckles and "do over" parts house receipts to testify about Haynes "manuals"!! |
|
| Author: | ave_d [ Fri Nov 23, 2012 4:58 pm ] |
| Post subject: | |
Try This...If it's not clear enough, let me know and I'll snap another pic in the AM. Took this one juggling a flashlight and the phone. This off my '80 D-150. Dave https://picasaweb.google.com/1061509146 ... er23201203 |
|
| Author: | duval67 [ Sat Nov 24, 2012 10:28 am ] |
| Post subject: | |
I hear you ragtop. They are kind of terrible sometimes. Quote: Try This...If it's not clear enough, let me know and I'll snap another pic in the AM. Took this one juggling a flashlight and the phone.
Thanks Dave, much appreciated! That'll definitely help me out. I think I can work with the picture. It's a little blurry, but I think I can make everything out okay. Thanks again!
This off my '80 D-150. Dave https://picasaweb.google.com/1061509146 ... er23201203 |
|
| Author: | cw6er [ Wed Nov 28, 2012 10:00 am ] |
| Post subject: | |
Page 6-12, fig. 1.6t in the Haynes shows the same diagram for the '80 225CDI |
|
| Author: | duval67 [ Wed Nov 28, 2012 10:59 am ] |
| Post subject: | |
Quote: Page 6-12, fig. 1.6t in the Haynes shows the same diagram for the '80 225CDI
Guess I'm either blind or stupid. Thanks.
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|