Since Lou laid claim to 2 sets, if these are for real i would like a set of the rockers as well. (Before they all get snatched up!
)-Aaron
| Slant Six Forum https://slantsix.org/forum/ |
|
| Have parts https://slantsix.org/forum/viewtopic.php?t=5052 |
Page 1 of 1 |
| Author: | Ohiowedge [ Fri Feb 21, 2003 6:15 am ] |
| Post subject: | Have parts |
Have acquired several sets of /6 roller rockers from Mopar. They are 1.6 ratio. Part # P4532863. Also have aluminum 2 barrel intakes Part # P4532057 Also purple shaft cams Part # P4532144. Don't know specs on this cam. If anyone know what the specs are on this cam please advise me. No pricing on these items as yet. For more information please call Bob at 734-854-8912 EST. from 7am to 6pm. Thank you. |
|
| Author: | Dart270 [ Fri Feb 21, 2003 8:19 am ] |
| Post subject: | |
I didn't know Mopar ever made roller rockers, or 1.6 rockers for that matter, for the Slant. If these are for real, then I'm definitely interested in 2 sets. Are these steel? I assume they just have roller tips? I am not familiar with that cam grind number either - sorry. Thanks, Lou |
|
| Author: | Super6 [ Fri Feb 21, 2003 9:46 am ] |
| Post subject: | |
Since Lou laid claim to 2 sets, if these are for real i would like a set of the rockers as well. (Before they all get snatched up! )-Aaron |
|
| Author: | Slant Cecil [ Fri Feb 21, 2003 9:57 pm ] |
| Post subject: | |
All three appear to be bad part #s. Cecil |
|
| Author: | slantzilla [ Fri Feb 21, 2003 10:40 pm ] |
| Post subject: | Gotta go with Cecil here....... |
I dug through my old MP catalogs and could find no mention of Slant roller rockers, the M-1 number is a 4529115, and no cams had 453 numbers, from 2.2 motor to Hemi. Clarifications please?
|
|
| Author: | Slant Cecil [ Fri Feb 21, 2003 10:55 pm ] |
| Post subject: | |
The production or OEM aluminum 2 barrel intake is part # 4273131, still no match. The closest part #s to these three are 4532864 and 4532865, both are sleeves for the aluminum sprint car block. Cecil |
|
| Author: | james longhurst [ Sat Feb 22, 2003 6:16 am ] |
| Post subject: | not all sixes slant |
mp used to offer roller rockers for jeep six cylinder motors, albeit a different p/n. my question here is, why would mp discontinue slant six EIS kits, half of their cams/intakes and most of their pistons (not to mention the ported heads no one could afford) then turn around and offer roller rockers (for the first time) and a new intake and cam? don't get me wrong, i'd be happy as $#!+ to see this and would get the cash somehow. but i can't help thinking "wha?....." -james |
|
| Author: | Doctor Dodge [ Sat Feb 22, 2003 8:35 am ] |
| Post subject: | |
It is "Buyer Beware" on this one, do your homework before sending any $$$. DD |
|
| Author: | Dart270 [ Sat Feb 22, 2003 10:32 pm ] |
| Post subject: | |
I thought as much, just hopeful... Thanks for the sleuthing, boys. Lou |
|
| Author: | Slant Cecil [ Tue Feb 25, 2003 11:52 am ] |
| Post subject: | |
We may have jumped the gun a little on these part #s. I still don't know what the rockers and cam are, maybe Jeep parts, but the intake is the CASTING #, 4532057, not the part #, 4529115, for the M-1 intake. The OEM '72-up stud mount rockers on Jeeps are 1.6 ratio, that's what the rockers may be. Cecil |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|