Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Dec 02, 2024 12:57 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Wed Jan 02, 2013 2:32 pm 
Offline
2 BBL ''SuperSix''

Joined: Wed Jun 16, 2010 10:51 am
Posts: 14
Location: Southern California
Car Model:
Hello,

I have a 64 a100, that after a year of un(der)employment, I am getting back to work on again. The wiring harness is shot due to the ammeter frying. I bypassed it, and it worked for a little while, but it is truly shot, with a good 5 feet of it melted together.

I have been digging for months to find a harness for this beast and other than the "mopar" Painless setup for over $400.00, I cannot find anything specific. Can anybody steer me to a place where I can get a specific harness, or reassure me I am not throwing my money away on the Painless "mopar" setup?

Below is a thread I am running on this van on another site, for your viewing pleasure.

http://zombiehunters.org/forum/viewtopi ... 45&t=65442


Top
   
 Post subject:
PostPosted: Wed Jan 02, 2013 3:16 pm 
Offline
TBI Slant 6

Joined: Sun Jul 16, 2006 9:17 pm
Posts: 221
Location: NW New Jersey
Car Model:
About all I can offer is my opinion of Painless. I know friends that have used their products and only have good to say. They use automotive grade wire (many companies don't), seal connections against moisture damage, and actually test everything they ship. They are an American company (Texas), which may help our own economy.

Of course you have the old fashioned ammeter issue to contend with asside. I seem to recall numerous posts about volt meter conversions and even one where you install a shunt to arrive at amps. Search the site to see what you can come up with.

Mike

_________________
Recognized by US Federal Courts as a Fuel Economy Expert!


Top
   
 Post subject:
PostPosted: Wed Jan 02, 2013 3:35 pm 
Offline
EFI Slant 6
User avatar

Joined: Sun Feb 06, 2005 8:13 pm
Posts: 439
Location: South Austin, Texas
Car Model:
Badawg, here are the wiring harness makers I've bookmarked. For the van, you'll probably need to call 'em. I haven't seen a site offering wiring harnesses for vans.
I used to have a '69 A-100, but it was a South Louisiana rustbucket. Great potential, but someone wanted it & I sold it!

http://www.ynzyesterdaysparts.com/catalog/

http://www.evanswiring.com/catalog.htm

http://www.wiringharness.com/

http://www.ronfrancis.com/

You might post your request over on the Yahoo A-100 group. They're a friendly bunch, might have an answer for you.

ATB

BC

_________________
'64 Dart GT convertible, 64 Dart 170 2-door post sedan in faded blue and rust (the Az Dart) & a sixty THREE Dart 170 2-door post sedan in faded blue and rust. (future project)
Early Dart Disorder (EDD) is real, and I've got it!


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited