Slant Six Forum :: 64 Dart steering column pic wanted

64, you've been more than helpful don't worry about it. I had a feeling it would be a tough find. I actually think I got what I needed by an ebay search. I've done this before to see what an old part looks like. Of course you have to be carefull if you don't already have an idea of what you're looking at because so much stuff is listed wrong on that site.

I have to stop being pigheaded and thinking I'll remember how I took something apart and take pics of EVERYYTHING I disassemble.

Thanks again

Author:	bbbbbb9 [ Mon Jan 07, 2013 9:03 am ]
Post subject:	64 Dart steering column pic wanted
Does anyone have a FSM for a 64 Dart that they can copy the exploded view of the steering column and post it? Thanks in advance

Author:	64ragtop [ Mon Jan 07, 2013 8:35 pm ]
Post subject:
This one? ATB BC

Author:	bbbbbb9 [ Tue Jan 08, 2013 6:06 am ]
Post subject:
What I need is a picture of how the components of the turn signal, bearing, horn ring and steering wheel portion is put back together. Just want to verify, I'm doing it right before I install it. Thanks 64 ragtop

Author:	64ragtop [ Tue Jan 08, 2013 10:55 pm ]
Post subject:
I couldn't find such a picture in my '64 Dodge FSM. It would sure ease my mind to have if I were in your place. I can only suggest googling for it. Wish I could be more help. ATB BC

Author:	bbbbbb9 [ Wed Jan 09, 2013 6:06 am ]
Post subject:
64, you've been more than helpful don't worry about it. I had a feeling it would be a tough find. I actually think I got what I needed by an ebay search. I've done this before to see what an old part looks like. Of course you have to be carefull if you don't already have an idea of what you're looking at because so much stuff is listed wrong on that site. I have to stop being pigheaded and thinking I'll remember how I took something apart and take pics of EVERYYTHING I disassemble. Thanks again

Slant Six Forum https://slantsix.org/forum/

64 Dart steering column pic wanted https://slantsix.org/forum/viewtopic.php?t=50728	Page 1 of 1

Author:	64ragtop [ Thu Jan 10, 2013 3:46 pm ]
Post subject:
Quote: 64, you've been more than helpful don't worry about it. I had a feeling it would be a tough find. I actually think I got what I needed by an ebay search. I've done this before to see what an old part looks like. Of course you have to be carefull if you don't already have an idea of what you're looking at because so much stuff is listed wrong on that site. I have to stop being pigheaded and thinking I'll remember how I took something apart and take pics of EVERYYTHING I disassemble. Thanks again That's an excellent plan, bb(etc), and one I sometimes remember to employ myself. Yeah, egag listing can sure mislead you. I use the "ask seller a question" feature. Sometimes that works. ATB BC

Page 1 of 1	All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/