Slant Six Forum
https://slantsix.org/forum/

1964 Dodge tank filler pipe grommet/seal
https://slantsix.org/forum/viewtopic.php?t=50909
Page 1 of 1

Author:  64DartGT [ Wed Jan 23, 2013 2:25 pm ]
Post subject:  1964 Dodge tank filler pipe grommet/seal

Any one know the part number and a good source for the grommet/seal for a 64 Dart filler pipe on the gas tank........

Author:  Romeo Furio [ Wed Jan 23, 2013 3:08 pm ]
Post subject:  seal

I got mine from R/T Specialties 570-388-1082, RTSpecialties.net

Author:  64DartGT [ Wed Jan 23, 2013 4:15 pm ]
Post subject: 

Thanks I'll check them out.....

Author:  Doc [ Wed Jan 23, 2013 5:06 pm ]
Post subject: 

Also try Metro Molded Parts Inc.
DD

http://www.metrommp.com

Author:  64DartGT [ Thu Jan 24, 2013 1:18 am ]
Post subject: 

I'll check that one too thanks for info

Author:  SpaceFrank [ Tue Jan 29, 2013 2:15 pm ]
Post subject: 

Nice, Doc! MMP has it for $11.45, part number is GF 18-D. I just replaced my gas tank and had to fill in the cracks in this seal with black RTV, but I'll be replacing it now.

Author:  Doc [ Tue Jan 29, 2013 3:03 pm ]
Post subject: 

I think MMP is the manufacturer and everyone else... re-sellers.
DD

Author:  64DartGT [ Tue Jan 29, 2013 6:01 pm ]
Post subject: 

Thanks guys for the info. Pulled my tank to install the new gas tank and the filler pipe grommet was like new, just needed a little cleaning. I bought one off EBay with the same part number and Chrysler stamp on it as the one on my car for 17.50 which I no longer need now since I was able to reuse my old one. Thanks again for your help........

Author:  64ragtop [ Wed Jan 30, 2013 6:25 pm ]
Post subject: 

Quote:
Nice, Doc! MMP has it for $11.45, part number is GF 18-D. I just replaced my gas tank and had to fill in the cracks in this seal with black RTV, but I'll be replacing it now.
Good thing you're replacing the grommet you "repaired" with black RTV. Gasoline and alcohol love eating that stuff and carrying it to your fuel filter.

Unfortunately, the fuel filter doesn't like it and your engine won't like what happens next.

ATB

BC

Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/