What shape are they... round?
Have you looked at www.energysuspensionparts.com?
DD
| Slant Six Forum https://slantsix.org/forum/ |
|
| Sway bar bushings for 75 Dodge D100 https://slantsix.org/forum/viewtopic.php?t=51118 |
Page 1 of 1 |
| Author: | SlantedTrucker [ Fri Feb 15, 2013 1:47 pm ] |
| Post subject: | Sway bar bushings for 75 Dodge D100 |
Hello everyone! I found a front factory sway bar for my 1975 D100 and I'm having a hard time finding the bushings that go around the strut rod at the end link connection. I have all the other bushings in hand. Does anyone know where I could find these? Thanks, Sam |
|
| Author: | Doc [ Fri Feb 15, 2013 2:13 pm ] |
| Post subject: | |
What shape are they... round? Have you looked at www.energysuspensionparts.com? DD
|
|
| Author: | SlantedTrucker [ Sat Feb 16, 2013 2:11 am ] |
| Post subject: | |
Thanks for the reply Doc! Yes they are round, they wrap around or slide over the strut rod and the two half round brackets (that are connected to the end link) bolt together around the bushing. I think I see them in a set on the energysuspension website but I was hoping not to have to buy a whole set since I already bought all the other bushings seperately from Rockauto. Oh well looks like I'll have to suck it up and do it anyway to get em  .Thanks, Sam |
|
| Author: | SlantedTrucker [ Sat Feb 16, 2013 7:40 am ] |
| Post subject: | |
I finally found the ones I was looking for Moog#7064 from a seller on E-bay. These are kinda hard to find by themselves! They dont show up when you just type in my vehicle had to cross reference. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|