| Slant Six Forum https://slantsix.org/forum/ |
|
| anyone know where to get vacuum nipple for 86 slant six? https://slantsix.org/forum/viewtopic.php?t=51140 |
Page 1 of 1 |
| Author: | 86ramslant6 [ Sun Feb 17, 2013 2:22 pm ] |
| Post subject: | anyone know where to get vacuum nipple for 86 slant six? |
My intake manifold had a plastic nipple that ran the brake booster on my truck. I somehow managed to break that nipple and need to find another one. does any one know where I can find that nipple? I am not sure I really want to try driving that truck without the brake booster working. Thank you for any help! |
|
| Author: | emsvitil [ Sun Feb 17, 2013 3:01 pm ] |
| Post subject: | |
Was it connected to the #6 intake runner? If so, I believe it's threaded as NPT (not sure of the size), and you should be able to go to the hardware store to get something that will work.... |
|
| Author: | Rug_Trucker [ Sun Feb 17, 2013 4:24 pm ] |
| Post subject: | |
I think he wants th fitting that is on the booster. |
|
| Author: | Fopar [ Sun Feb 17, 2013 4:34 pm ] |
| Post subject: | |
Check your local auto parts store. Richard |
|
| Author: | 86ramslant6 [ Sun Feb 17, 2013 5:31 pm ] |
| Post subject: | |
I want the nipple that is on the #6 intake runner, it had at least one small branch off for a vacuum line for elsewhere on the engine. Unfortunately the auto parts stores don't seem to have it available |
|
| Author: | DusterIdiot [ Sun Feb 17, 2013 5:36 pm ] |
| Post subject: | Junk yard... |
Quote: I want the nipple that is on the #6 intake runner
That's a junkyard item, some of the late slants I've pulled out of trucks lately were NF threaded instead of NPT like the Pre-80's.The good thing is that these are the same on similar era V-8's so find a 1980-1990 Dodge 318 and pull the tree from it... -D.Idiot |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|