| Slant Six Forum https://slantsix.org/forum/ |
|
| Water outlet for heater core https://slantsix.org/forum/viewtopic.php?t=51320 |
Page 1 of 1 |
| Author: | jhdeval [ Tue Mar 05, 2013 8:52 pm ] |
| Post subject: | Water outlet for heater core |
Is it possible to replace the outlet from the head for the heater core? The outlet I am referring to is right behind the thermostat housing. |
|
| Author: | DadTruck [ Wed Mar 06, 2013 4:55 am ] |
| Post subject: | |
are you looking for something like this? http://www.classicindustries.com/mopar/ ... ses-parts/ I am sure better pricing is available, found that site with a quick internet search. |
|
| Author: | Charrlie_S [ Wed Mar 06, 2013 1:37 pm ] |
| Post subject: | |
Are you talking about the nipple screwed into the head that the heater hose connects to? Thay can be unscrewed, but usually very difficult. It gets very rusty. Might have to remove it in pieces. A replacement nipple can be purchased from any auto part store. They are generic heater nipples, in the "help" section. |
|
| Author: | jhdeval [ Wed Mar 06, 2013 8:30 pm ] |
| Post subject: | |
Thank you guys yes I am and yes they are very difficult to remove. After doing a little grinding and cleaning I think they may be in good enough shape to keep. Also I had not seen the threads under all the gunk. After cleaning I was able to see it. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|