Here are the pictures.
Broken return port
Back of the pump
Hose with return port still stuck
| Slant Six Forum https://slantsix.org/forum/ |
|
| Broke my power steering pump... :( https://slantsix.org/forum/viewtopic.php?t=51794 |
Page 1 of 1 |
| Author: | jhdeval [ Sun Apr 21, 2013 9:15 pm ] |
| Post subject: | Broke my power steering pump... :( |
While pulling the engine I did not see the power steering return hose was still attached to the gear and I ripped the return port out of the body. Now I need to replace it. The cap has been missing since I had the car so I would really like to replace it with a complete unit. Any suggestions? |
|
| Author: | Fopar [ Sun Apr 21, 2013 9:31 pm ] |
| Post subject: | |
post picture of the pump housing showing the return port and the back side of the pump. You may be able to have the return port re-welded. Richard |
|
| Author: | jhdeval [ Mon Apr 22, 2013 7:11 am ] |
| Post subject: | |
Here are the pictures. Broken return port Back of the pump Hose with return port still stuck
|
|
| Author: | DusterIdiot [ Mon Apr 22, 2013 7:31 am ] |
| Post subject: | Hmmm.... |
I will check my stash today, I might have a version of that pump... -D.Idiot |
|
| Author: | jhdeval [ Mon Apr 22, 2013 8:16 am ] |
| Post subject: | |
Awesome because NO ONE in the country has one in stock. I was getting ready to see if I could get it welded back on. |
|
| Author: | Fopar [ Mon Apr 22, 2013 8:51 am ] |
| Post subject: | |
See what pictures can do for you!! Thanks Rob  Richard |
|
| Author: | jhdeval [ Mon Apr 22, 2013 10:09 am ] |
| Post subject: | |
Rob no need to dig any further. Thank you though. While on this adventure I found an AWESOME welder. He welded it back on with no reservations. Didn't even have to disassemble it. 
|
|
| Author: | Aggressive Ted [ Mon Apr 22, 2013 12:18 pm ] |
| Post subject: | |
I love happy endings! Nice work.... |
|
| Author: | Reed [ Mon Apr 22, 2013 1:29 pm ] |
| Post subject: | |
Sweet. I love finding people that actually know how to do things with their hands. |
|
| Author: | DusterIdiot [ Mon Apr 22, 2013 3:52 pm ] |
| Post subject: | Nice! |
Glad it worked. If it doesn't hold, I got 2 candidates!  -D.Idiot |
|
| Author: | jhdeval [ Mon Apr 22, 2013 7:10 pm ] |
| Post subject: | |
Thank you Rob. I will keep it in mind. Also thank you for the valve cover. I just finished sanding it. I spent WAY WAY more time on it then I care to admit. lol |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|