Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Nov 17, 2026 11:14 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 9 posts ] 
Author Message
 Post subject: t5 to quicktime bell ??
PostPosted: Sun Mar 03, 2013 11:31 am 
Offline
TBI Slant 6

Joined: Tue Nov 06, 2012 4:30 am
Posts: 125
Location: LEBANON, MAINE
Car Model:
I am only seeing older posts on this is this avalible with the t5 bolt pattern and correct depth for slant six to ford t5 thanks. Also going to use hydraulic throw out bearing to simplify linkage thanks

_________________
1963 Plymouth Valiant Wagon


Top
   
PostPosted: Wed Mar 06, 2013 7:29 pm 
Offline
TBI Slant 6

Joined: Tue Nov 06, 2012 4:30 am
Posts: 125
Location: LEBANON, MAINE
Car Model:
Anyone running it with a t5 thanks

_________________
1963 Plymouth Valiant Wagon


Top
   
 Post subject:
PostPosted: Wed Mar 06, 2013 11:20 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14979
Location: Park Forest, Illinoisy
Car Model: 78 Volare
The drawback to a Quicktime is that it uses the stock Slant clutch and flywheel. People spending that much money usually want to get away from those pieces.

_________________
Official Cookie and Mater Tormentor.


Top
   
 Post subject:
PostPosted: Thu Mar 07, 2013 5:12 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 17683
Location: Blacksburg, VA
Car Model:
A few people have bought these, but I don't think anyone is running yet with a T5.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
 Post subject:
PostPosted: Thu Mar 07, 2013 12:41 pm 
Offline
Turbo Slant 6
User avatar

Joined: Wed Apr 30, 2003 6:43 pm
Posts: 976
Location: SoCal
Car Model: Toad Wagon
I don't believe they've run'em for anything but Chrysler gearboxes as yet.

Though I haven't taken exact measurements, I do have to say that there looks to be room inside for a larger clutch package.
I'll have it out in a couple weeks (prepping for the season), and'll try to remember to get some numbers.

_________________
Sex, drags, and rock & roll.
Dick, 225% crazy.
Hobby (cars, that is) Photos link


Top
   
 Post subject:
PostPosted: Sun Apr 28, 2013 6:21 pm 
Offline
TBI Slant 6

Joined: Tue Nov 06, 2012 4:30 am
Posts: 125
Location: LEBANON, MAINE
Car Model:
Old6rodder any luck

_________________
1963 Plymouth Valiant Wagon


Top
   
 Post subject:
PostPosted: Sun Apr 28, 2013 6:22 pm 
Offline
TBI Slant 6

Joined: Tue Nov 06, 2012 4:30 am
Posts: 125
Location: LEBANON, MAINE
Car Model:
Old6rodder any luck

_________________
1963 Plymouth Valiant Wagon


Top
   
 Post subject:
PostPosted: Sun Apr 28, 2013 11:59 pm 
Offline
Turbo Slant 6
User avatar

Joined: Wed Apr 30, 2003 6:43 pm
Posts: 976
Location: SoCal
Car Model: Toad Wagon
Yeah, I had to pull the engine prior to going down to Barona for their Antique Drags last weekend. I took the opportunity to measure the inside of the QT /6 bell. If you want to download it you can click on this picture for the source at Flickr, which you can copy by bringing up the original, I make'em public.

In addition, the 13.25" ID could be massaged out at least another 1/4" with but a bit of angle grinding at the two heavy blocks.

Image

_________________
Sex, drags, and rock & roll.
Dick, 225% crazy.
Hobby (cars, that is) Photos link


Top
   
 Post subject:
PostPosted: Tue Apr 30, 2013 6:33 pm 
Offline
EFI Slant 6
User avatar

Joined: Thu Jul 24, 2008 11:37 am
Posts: 411
Location: Brooklyn, NY
Car Model: 1964 Valiant V200
Lakewood/quicktime does not make a bell for the slant six with a T5 bolt pattern. They DO make an off-the-shelf slant six bell with the regular Mopar 3 and 4-speed pattern. They CAN make one for the T5 but it will cost you $1090.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited