| Slant Six Forum https://slantsix.org/forum/ |
|
| Part Throttle Kicdown 62 Toad? https://slantsix.org/forum/viewtopic.php?t=51860 |
Page 1 of 1 |
| Author: | Lobster1 [ Fri Apr 26, 2013 4:37 pm ] |
| Post subject: | Part Throttle Kicdown 62 Toad? |
Has anyone installed part throttle kickdown on an early 904? Is it possible? If yes I want to do it. I am running the Lokar cable, transgo, 2200 stall, internal filter and Hayden cooler. Work beautifully except the kickdown. I works but boy do I have to step on it... Cheers, BT |
|
| Author: | Reed [ Fri Apr 26, 2013 5:24 pm ] |
| Post subject: | |
I believe Pat Blais (Torqueflite Patty) has a kit he sells on eBay to retrofit part throttle kickdown to the early 904 valve bodies. I don't even think it is that expensive. Yeah, see the desciption in THIS eBay auction. I have purchased from him several times and he is a top notch supplier and good guy. |
|
| Author: | Lobster1 [ Fri Apr 26, 2013 5:57 pm ] |
| Post subject: | |
Thanks Reed! It looks like his shop is in Seattle, heck I might just drive the Valiant up and have him do the install, maybe a deep pan too? Awesome! Barnaby |
|
| Author: | Reed [ Fri Apr 26, 2013 6:42 pm ] |
| Post subject: | |
I don't know if he actually installs parts, or even has a brick and mortar store. He stuff is first rate though, and he has forgotten more about the torqueflite than I will ever know. |
|
| Author: | Lobster1 [ Fri Apr 26, 2013 10:57 pm ] |
| Post subject: | |
Again great lead. I'll call on Monday, fingers crossed that it is brick and mortar and hands on... BT |
|
| Author: | Lobster1 [ Tue Apr 30, 2013 4:24 pm ] |
| Post subject: | |
Just got off the phone with Pat Blias. This guy is a wealth of 904 knowledge, and he is setting my 904 with part throttle kickdown. He can do bench work, but not a full shop. Fair pricing too. Suggested installing a tranny temp gauge on the line to the cooler. Has anyone done this? Real curious to see my temp especially with the stall converter. Cheers, Barnaby |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|