| Slant Six Forum https://slantsix.org/forum/ |
|
| Rust above windshield https://slantsix.org/forum/viewtopic.php?t=51932 |
Page 1 of 1 |
| Author: | mopardean [ Thu May 02, 2013 11:39 am ] |
| Post subject: | Rust above windshield |
My 87 S/6 equipped Dodge half ton has some bubbles and one small hole in the sheet metal above the windshield. Does anybody know how this can be fixed....permanently ?? |
|
| Author: | mattelderca [ Thu May 02, 2013 11:54 am ] |
| Post subject: | Re: Rust above windshield |
Quote: My 87 S/6 equipped Dodge half ton has some bubbles and one small hole in the sheet metal above the windshield. Does anybody know how this can be fixed....permanently ??
Remove windshield and interior trim, Grind off all rusted areas, Weld in patches where holes are, Prime, level with fill if required, Prime and paint the repaired areas, Reinstall windshield and interior trim.
|
|
| Author: | mopardean [ Thu May 02, 2013 1:10 pm ] |
| Post subject: | |
thanks have you attempted this with this series of Dodge trucks (81-93) ? i am thinking it is not a simple repair since it seems to involve two panels connected at the top of the windshield??? |
|
| Author: | mopardean [ Thu May 02, 2013 1:18 pm ] |
| Post subject: | |
the rust on my truck is acutally in the roof area above the little drip edge gutter thing that overhangs the windshield |
|
| Author: | zorg [ Thu May 02, 2013 5:53 pm ] |
| Post subject: | |
Here's a link to a guy that did it. http://ramchargercentral.com/projects/s ... msg1808807 There's a bunch of random junk at the beginning of the post, but scroll down a little ways and he has lots of pictures. Hope that helps. |
|
| Author: | mopardean [ Fri May 03, 2013 6:39 am ] |
| Post subject: | |
Zorg thank you very much....this is much appreciated Dean |
|
| Author: | zorg [ Wed May 08, 2013 10:18 pm ] |
| Post subject: | |
This might be a better link (and what I was trying to find last time, not sure where it was hiding?): http://ramchargercentral.com/projects/d ... placement/ |
|
| Author: | mopardean [ Thu May 09, 2013 6:15 am ] |
| Post subject: | |
thanks again zorg this is a great big job but i doubt if i could ever find a decent cab |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|