Slant Six Forum
https://slantsix.org/forum/

pressure plate spring retainers
https://slantsix.org/forum/viewtopic.php?t=51934
Page 1 of 1

Author:  Junior [ Thu May 02, 2013 12:37 pm ]
Post subject:  pressure plate spring retainers

so i got this pressure plate from a board member a while back and finally put it in. i thought i had the disc in backwards so i pulled the tranny to find this.
Image

so now my question is how important are they? can i leave it alone. i cant get it out. the one on the bottom was pushed through some how and the ones that are missing didnt come with it. the pressure plate i took out originally didnt have any in it.

Author:  sandy in BC [ Thu May 02, 2013 2:30 pm ]
Post subject: 

For the price of a new PP and disc I would start over. If your clutch lets loose it can cause a lot of damage.

Author:  Junior [ Thu May 02, 2013 3:21 pm ]
Post subject: 

they Are Both Brand New, LessThan 100 Feet On Both Of Them.

Author:  sandy in BC [ Thu May 02, 2013 3:53 pm ]
Post subject: 

OK.

But there are obviously things wrong here. If this was mine I would either start over or take the whole package to a driveline place and see what they can salvage.

Im pretty big on do it yourself but a clutch that is even a little unbalanced will never work very well and likely chatter.

Clutch chatter will wreck ujoints ,engine mounts , trans linkage, and any confidence you have in the car.

Taking a pressure plate apart at home is a risky endeavour.

When I first got the Valaint there were some chattering clutch issues. When I took it all apart the inside of the bell showed signs of a fairly significant clutch incident....pretty sobering. I replaced everything.

Author:  Junior [ Thu May 02, 2013 5:04 pm ]
Post subject: 

I guess A Better Question Would Be what Is The Purpose Of The Plugs?
Sorry About The Caps My Phone Is Messing Up

Author:  Dart270 [ Fri May 03, 2013 6:05 am ]
Post subject: 

I don't see what is causing you concern. Those little discs? Were they there before and maybe you just noticed them? Please explain.

Thanks,

Lou

Author:  Junior [ Fri May 03, 2013 10:28 am ]
Post subject: 

the little pressed in weights or what ever you call them that go in the holes for the springs. one of them has come loose. can i just pop it in and call it a day? i dont know what they are supposed to do. and i just put a cam in so im gonna be flirting with the 5k shifts and i really like my legs.

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/