Slant Six Forum
https://slantsix.org/forum/

flex or rigid bands in 904 rebuild?
https://slantsix.org/forum/viewtopic.php?t=52088
Page 1 of 1

Author:  hideogumperjr [ Thu May 16, 2013 9:33 am ]
Post subject:  flex or rigid bands in 904 rebuild?

Hi all, I am in process of rebuilding my 904 for my slant, the engine is at the machine shop right now.
One option I have is for flex or rigid bands, can someone enlighten me on which is the better option and what the differences are in them?

Thanks a bunch guys!

Author:  bigslant6fan [ Thu May 16, 2013 12:54 pm ]
Post subject:  .

The rigid bands are stronger and great for drag racing,but cause a slight delay on a 3-2 downshift during street driving. I recommend a front semi-flex band from an A-500 Trans because they are 1/8 inch wider than a 904 one. But however,I've never installed one in a Trans earlier then 68.

Author:  hideogumperjr [ Thu May 16, 2013 1:35 pm ]
Post subject:  flex or rigid bands in 904 rebuild?

Thanks for the info!

Author:  slantzilla [ Thu May 16, 2013 7:18 pm ]
Post subject: 

Rigid is usually used on the low/reverse drum.
Flex bands are normally used on the front drum.

Author:  hideogumperjr [ Fri May 17, 2013 8:39 am ]
Post subject:  flex or rigid bands in 904 rebuild?

Thanks Zilla!

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/