| Slant Six Forum https://slantsix.org/forum/ |
|
| will a 1966 sweptline 8.75 rear fit a 1968 dart https://slantsix.org/forum/viewtopic.php?t=52831 |
Page 1 of 1 |
| Author: | USAJon [ Wed Jul 24, 2013 2:56 pm ] |
| Post subject: | will a 1966 sweptline 8.75 rear fit a 1968 dart |
got a line on a 1966 sweptline 8.75 rear wondering if it will fit a 1968 Dodge Dart.. |
|
| Author: | Reed [ Wed Jul 24, 2013 3:11 pm ] |
| Post subject: | |
According to THIS webpage the truck 8 3/4 is 7 inches wider than the a=body 8 3/4. You could run it as-is and simply move the spring perches, or pay to have the tubes and axles cut down and resplined and still move the spring perches. Take 3.5 inches off the tubes and axles on each side and I think you would be OK. |
|
| Author: | kesteb [ Wed Jul 24, 2013 9:08 pm ] |
| Post subject: | |
At 3.5" per side you could even have the old axles resplined. It takes a minimum of 3" per side before that is doable. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|