Quote:
i could throw in an envelope 'fer ya
thanks 
,, right now I am just rounding up some part numbers....Quote:
Fel-Pro 13338
bingo ,, that is the correct o ring,,,
| Slant Six Forum https://slantsix.org/forum/ |
|
| oil pump o rings https://slantsix.org/forum/viewtopic.php?t=52917 |
Page 1 of 1 |
| Author: | DadTruck [ Thu Aug 01, 2013 7:14 am ] |
| Post subject: | oil pump o rings |
for slant six oil pumps,,,anyone know of a source for the large o ring that goes under the rotor cap and the sealing washer for the pressure relief plug? thanks |
|
| Author: | DusterIdiot [ Thu Aug 01, 2013 7:16 am ] |
| Post subject: | They are.. |
Included in the Felpro Master Gasket set for an engine rebuild, I'd bet with some looking around the Fel-Pro catalog might have them listed. -D.Idiot |
|
| Author: | DadTruck [ Thu Aug 01, 2013 7:46 am ] |
| Post subject: | |
I did find the oil pump pressure relief plug seal,, Fel Pro fpg 3122 |
|
| Author: | DusterIdiot [ Thu Aug 01, 2013 9:43 am ] |
| Post subject: | If.... |
If you can't find the cover gasket/large "o" ring, let me know i might have one from a spare engine rebuild kit that i could throw in an envelope 'fer ya! -D.Idiot |
|
| Author: | olafla [ Thu Aug 01, 2013 5:56 pm ] |
| Post subject: | |
Is Fel-Pro 13338 the one you're looking for? http://www.summitracing.com/parts/fel-1 ... e/chrysler Olaf |
|
| Author: | DadTruck [ Fri Aug 02, 2013 5:11 am ] |
| Post subject: | |
Quote: i could throw in an envelope 'fer ya
thanks ,, right now I am just rounding up some part numbers....Quote: Fel-Pro 13338
bingo ,, that is the correct o ring,,,
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|