| Slant Six Forum https://slantsix.org/forum/ |
|
| k h transfer tube repops https://slantsix.org/forum/viewtopic.php?t=53292 |
Page 1 of 1 |
| Author: | stolan83 [ Tue Sep 10, 2013 11:58 am ] |
| Post subject: | k h transfer tube repops |
Well if your luck is as bad as mine and one brakes i found repops though california mustangs.com 11.00 for the set |
|
| Author: | Greg Ondayko [ Tue Sep 10, 2013 5:03 pm ] |
| Post subject: | |
I made mine with a tubing bender and a flare tool. less than $11.00 now they are repoped... good to know. Greg |
|
| Author: | stolan83 [ Tue Sep 10, 2013 10:01 pm ] |
| Post subject: | |
The binder i have can not make that small of a 90 and it was cheaper then a new bender and well worth not having to do it my self. Plus their show room it about 15 mins from my house on a good socal traffic day. They also have the pistons if you want to rebuild the calipers your self |
|
| Author: | Pierre [ Thu Sep 12, 2013 9:23 am ] |
| Post subject: | |
Quote: now they are repoped... good to know.
They've been repoped for some time, I remember buying some 10+ years ago from one of the major tube places (classic tube, finelines, etc) - may have not been $11 but they were available.
|
|
| Author: | Greg Ondayko [ Thu Sep 12, 2013 9:40 am ] |
| Post subject: | |
Yep, 17 years ago I was a kid with hardly any money and resources when I put KH Discs on my Dart. I rebuilt a set that were in the Corner of my dads garage. I was young and dumb - so I didnt know who to contact or that there were such places that made stuff like this so I made 'em myself. Greg |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|