| Slant Six Forum https://slantsix.org/forum/ |
|
| New source for coated copper head gasket https://slantsix.org/forum/viewtopic.php?t=53557 |
Page 1 of 1 |
| Author: | Turbo Toad [ Thu Oct 10, 2013 8:48 am ] |
| Post subject: | New source for coated copper head gasket |
Flatout Gaskets & Fabrications 668 Tower Rd. Mundelein, IL. 60060 (847) 837-9200 P (847) 837-9628 F www.flatoutgroup.com Here is a new source for rubber coated copper head gasket for the slant. It's not in the catalog yet but here's the base part number 9874 you will need to no what bore and thickness. Also the recommend O ring the block or head. Also you will have to call and order direct from the company none of the distributors have it in there catalog Aaron |
|
| Author: | Rick Covalt [ Thu Oct 10, 2013 6:36 pm ] |
| Post subject: | |
Did they say how thick of gaskets they have available? |
|
| Author: | Turbo Toad [ Thu Oct 10, 2013 7:30 pm ] |
| Post subject: | |
From the email I received any bore size any thickness |
|
| Author: | CNC-Dude [ Fri Oct 11, 2013 10:18 am ] |
| Post subject: | |
I'm getting some made now to go along with the intake/exhaust gaskets I already have available. Mine will be .040" thick, big bore of course. |
|
| Author: | Turbo Toad [ Fri Oct 11, 2013 1:08 pm ] |
| Post subject: | |
Quote: I'm getting some made now to go along with the intake/exhaust gaskets I already have available. Mine will be .040" thick, big bore of course.
So what does big bore equal? Also does the intake exhaust gasket have the big port openings? How thick are they? Aaron |
|
| Author: | CNC-Dude [ Mon Oct 14, 2013 3:40 pm ] |
| Post subject: | |
There made to accomodate a 3.500" bore. The intake/exhaust gaskets are made with larger ports to accomodate a ported head and are .060" thick. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|