I cannot find the one that goes into the intake for my power brakes ect, anyone have a spare ?

Every one I come across is broken

If it don't have to look OE, hardware or auto parts store should have a street tee or a tee with a nipple, then add fittings to the two open holes for what you need

_________________

I would like a factory look if possible. Ill find one eventually, just thought someone here might have one laying around. Thanks though

Where you located, and how many outlets do you need off that manifold nipple? (single or multi-hose)
I might have something out in the cave, but I'll have to take a peek later today and get back to you.

Roger

Thanks, the tee would have to have a large for brake booster and a small for the vacuum hoses on the A/C.

I am in Brandon Florida, my e-mail is jhason2@yahoo.com if you prefer that.

For anyone interested as it turns out Ford F-150, expeditions and such have a multiple nipple fitting that is a direct bolt in for the slant six. If anyone would like a picture let me know.

Looks factory. There is a low version that I was not able to find ( but I didnt look very hard ) Mine sticks up and out of the intake a couple of inches but in my opinion it looks much better than the brass fittings I was considering from Napa.