| Slant Six Forum https://slantsix.org/forum/ |
|
| rod style carb return spring?? https://slantsix.org/forum/viewtopic.php?t=54158 |
Page 1 of 1 |
| Author: | barbee6043 [ Fri Dec 27, 2013 6:38 am ] |
| Post subject: | rod style carb return spring?? |
/6 rod style 1920, i can't see anyplace for return spring to go on carb linkage ? surely has to be top end near the 2 screws.? but no little hole or slot for it. couldn't find any help under search. |
|
| Author: | robertob [ Fri Dec 27, 2013 8:34 am ] |
| Post subject: | |
It goes in the middle of the rod, down to a tab that is under one of the starter bolts. |
|
| Author: | barbee6043 [ Fri Dec 27, 2013 9:59 am ] |
| Post subject: | spring |
the spring i'm referring to is the spring at the carb throttle. ?? |
|
| Author: | barbee6043 [ Fri Dec 27, 2013 4:41 pm ] |
| Post subject: | |
O K carb has no spring , just the one at the rod. i adjusted the rod at gas pedal and all works great now!!! |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|