| Slant Six Forum https://slantsix.org/forum/ |
|
| coil for HEI https://slantsix.org/forum/viewtopic.php?t=54397 |
Page 1 of 1 |
| Author: | 65 dartman [ Thu Jan 23, 2014 10:46 am ] |
| Post subject: | coil for HEI |
On my 87 D100 I've gutted the stock ECM and will be mounting the HEI module inside. Is there a stock looking canister style coil available to use with the HEI. I know I can use the GM coil/bracket/HEI assembly as SSDan mentioned in the HEI thread but I'd like to keep the engine compartment stock looking. |
|
| Author: | Rick Covalt [ Thu Jan 23, 2014 11:10 am ] |
| Post subject: | |
2 of our 3 trucks are running the original factory coil. Rick |
|
| Author: | 65 dartman [ Thu Jan 23, 2014 1:23 pm ] |
| Post subject: | |
I was under the impression the coil needed to be a high output coil. |
|
| Author: | Reed [ Thu Jan 23, 2014 1:34 pm ] |
| Post subject: | |
Doesn't have to be. You get more benefit if it is, though. |
|
| Author: | SlantSteve [ Thu Jan 23, 2014 2:25 pm ] |
| Post subject: | |
I used a pertronix oil filled coil, .6 ohm I think, looks exactly like a stock coil. Cheers |
|
| Author: | slantvaliant [ Sat Feb 01, 2014 7:50 pm ] |
| Post subject: | |
I used an Accel 8140 with HEI for years. It was yellow, but a little paint would fix that. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|