| Slant Six Forum https://slantsix.org/forum/ |
|
| torsion bars... https://slantsix.org/forum/viewtopic.php?t=54476 |
Page 1 of 1 |
| Author: | '67 Dart 270 [ Thu Jan 30, 2014 4:01 pm ] |
| Post subject: | torsion bars... |
I've heard some people replace the wire retainer for torsion bars with a "real" snap ring. Does anyone know the size of such a snap ring? thanks all. bg |
|
| Author: | WagonsRcool [ Sat Feb 01, 2014 8:44 am ] |
| Post subject: | |
Why? I've never - ever heard heard of a torsion bar working loose & popping out of place. |
|
| Author: | wjajr [ Sat Feb 01, 2014 7:26 pm ] |
| Post subject: | |
I used expanding snap rings on my car because I didn't want to order the real part and hold up the job. I don't remember what size I used. Be sure to bed each end of the bar in some wheel baring grease when reinstalling the bars. |
|
| Author: | '67 Dart 270 [ Mon Feb 03, 2014 10:31 am ] |
| Post subject: | just asking... |
I was just reading on A-bodies forum that some people where experiencing extra spacing issues with particular LCA bushings, and used some hexagonal shims and mentioned that they also replaced the wire retainer with conventional snap rings. Just curious if anyone knew the right thickness and diameter of the snap ring. bg |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|