On my 87 D100 I've gutted the stock ECM and will be mounting the HEI module inside. Is there a stock looking canister style coil available to use with the HEI. I know I can use the GM coil/bracket/HEI assembly as SSDan mentioned in the HEI thread but I'd like to keep the engine compartment stock looking.

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014

2 of our 3 trucks are running the original factory coil.

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

I was under the impression the coil needed to be a high output coil.

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014

Doesn't have to be. You get more benefit if it is, though.

_________________
Casually looking for a Clifford hyperpak intake for cheap.

I used a pertronix oil filled coil, .6 ohm I think, looks exactly like a stock coil. Cheers

I used an Accel 8140 with HEI for years. It was yellow, but a little paint would fix that.

_________________
"When you find a big kettle of crazy, it's best not to stir it." - Pointy-haired Boss

1964 Valiant V200, 225/Pushbutton 904
BBD, CAI, HEI, LBP, AC, AM/FM/USB, EIEIO