Slant Six Forum
https://slantsix.org/forum/

carter carb
https://slantsix.org/forum/viewtopic.php?t=54651		 Page 1 of 1
Author:  scuba1x [ Mon Feb 17, 2014 6:28 pm ]
Post subject:  carter carb
Need to rebuild the carb on my 1963 slant 6.

It is a single barrel and missing the ID tag.

How do I attach or insert a photo of the carb??


Any recommendations for a rebuild shop or replacement?
Author:  wjajr [ Mon Feb 17, 2014 7:16 pm ]
Post subject: 
Welcome aboard Scuba1x.

Look here for posting links, photos etc. Click on red text.

You should be able to rebuild your carburetor with a few simple tools. Once you know what it is, get a rebuild kit and have at it. These kits are just new gaskets, and a few parts that wear such as needle valves, and accelerator pump diaphragm. Not much to a one barrel, and plenty of help around here if you get stuck.

Try to pick up a Factory Repair Manual for your car's year and model, they are on the web in book and disk form, and prices very so shop around.
Author:  scuba1x [ Tue Feb 18, 2014 5:35 pm ]
Post subject: 
[img]http://www.flickr.com/photos/118045173@N05/

Here is the photo of the carb

Anyone know the model of this carb?? (id tag is missing)

Thanks![/img]
Author:  63Valiant [ Tue Feb 18, 2014 7:38 pm ]
Post subject: 
Looks like a standard Carter BBS. Yours has the external choke pull off so it's not a factory 63, so play it safe and get a kit for a 65 although they're probably the same kit anyway.

I just looked up on RockAuto, anyone know they not only stopped carrying carbs for the slant, but the rebuilds as well?? Our suppliers are drying up. :(
Author:  63Valiant [ Tue Feb 18, 2014 7:42 pm ]
Post subject: 
Found a kit on ebay:

http://www.ebay.com/itm/61-72-Dodge-Ply ... 61&vxp=mtr
Author:  scuba1x [ Tue Feb 18, 2014 8:36 pm ]
Post subject: 
Thanks!

I just ordered the rebuild kit from the link provided! :D
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/