Slant Six Forum https://slantsix.org/forum/ |
|
Free parts https://slantsix.org/forum/viewtopic.php?t=54907 |
Page 1 of 1 |
Author: | Romeo Furio [ Tue Mar 18, 2014 3:51 pm ] |
Post subject: | Free parts |
Anyone that will be attending MATS next month,, If you are in need of something I just might have it. I have some 64 Dart parts: Heater box,Controls cables,Push button dash shifter,Radio, Front and rear seats (2 door) 7 1/4 rear with 2.93 gears.Push button tranny with converter worked good when pulled.A 68 up Auto tranny with converter also worked.9'' Front spindles and drums,9''rear drums, 2 or 3 power steering boxes, Should have a few pumps and brackets V8 and slant. That's just what I can think of.More things I can look for you. After MATS everything will be scrapped. Not planning on building any more cars. |
Author: | 63Valiant [ Tue Mar 18, 2014 5:48 pm ] |
Post subject: | |
I have a feeling whatever MATS is, it isn't near Redding. |
Author: | Fopar [ Tue Mar 18, 2014 7:46 pm ] |
Post subject: | |
No it is Las Vegas, Nevada Richard |
Author: | Romeo Furio [ Wed Mar 19, 2014 6:23 am ] |
Post subject: | |
Thanks Fopar, I should have said Las Vegas |
Author: | limedust70 [ Fri Mar 21, 2014 9:28 pm ] |
Post subject: | |
I would be interested in the 64 push button tranny for my 63. |
Author: | Romeo Furio [ Sat Mar 22, 2014 5:15 am ] |
Post subject: | |
Not a problem I'll have it at the track for you. |
Author: | Greg Ondayko [ Sat Mar 22, 2014 8:07 am ] |
Post subject: | Re: Free parts |
Quote: Not planning on building any more cars.
ha ha.. I don't believe that one.are you just buyin and drivin now? Greg |
Author: | limedust70 [ Sat Mar 22, 2014 11:11 am ] |
Post subject: | |
Thanks. I'll have the truck to haul it home. |
Author: | Romeo Furio [ Sat Mar 22, 2014 5:23 pm ] |
Post subject: | |
I have 4 more years to save for when I turn 60 I will build my last car that will be either a 64 or 63 Plymouth Belvedere. Big Block for N/SS. |
Author: | 64ragtop [ Mon Mar 24, 2014 10:16 pm ] |
Post subject: | |
And how old is Charrlie S?? Why quit at 60?? BC |
Author: | Charrlie_S [ Tue Mar 25, 2014 3:44 am ] |
Post subject: | |
Quote: And how old is Charrlie S??
Old enough to know better, but dumb enough to do it anyway.BC Romeo, any chance you might have a set of 273 engine brackets, for a 64-66 "A" body? |
Author: | Romeo Furio [ Tue Mar 25, 2014 6:56 am ] |
Post subject: | |
Won't be quitting at 60, just the plan to have a car ready to race. In 2006 I was racing a 65 Belvedere in N/SSE and had a blast.Sold the engine and then the car.I have most parts to do another and a car but need to save for tranny work,body and paint. Charrlie, the cuda that the exhaust manifold came from is long gone. Sorry. |
Page 1 of 1 | All times are UTC-08:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |