Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 21, 2026 6:47 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: a390 info
PostPosted: Mon Mar 10, 2014 6:48 am 
Offline
2 BBL ''SuperSix''

Joined: Sun Mar 17, 2013 8:43 pm
Posts: 23
Location: portales
Car Model:
Can someone please help me with some info on the a390. Its originally a column shifted but looking to make it a floor shifter. I was looking for info on where 1,2,3,and reverse are I can move the first shifter lever on the tranny but the rear lever won't budge is this normal I'm hoping the reverse isn't locked up or the tranny is trashed.


Top
   
 Post subject: Typically...
PostPosted: Mon Mar 10, 2014 7:14 am 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
Typically one lever or the other has to be in the middle position or neutral for the other lever to engage a gear...so if the front lever is in the middle then your should be able to mover the rear lever...if you had a driveline yoke to install in the tailshaft you can rotate the assembly a little to see if it frees up the other gear and allows it to shift.


Top
   
 Post subject:
PostPosted: Mon Mar 10, 2014 7:44 am 
Offline
2 BBL ''SuperSix''

Joined: Sun Mar 17, 2013 8:43 pm
Posts: 23
Location: portales
Car Model:
Thanks duster I'll try this when I get home


Top
   
 Post subject: DI knows his trans
PostPosted: Tue Mar 11, 2014 5:38 am 
Offline
Board Sponsor

Joined: Sun Jan 29, 2006 9:13 am
Posts: 444
Location: Jensen Beach, FL
Car Model:
Hi DI- didnt the first dusters in 70 have the 390 manual 3 speed with either column or floor optioned factory shifters. i think the floor shifter for the 390 was the inland not hurst model. later the 230 full synchro 3 speed became an option and had a floorshift or column option too. am i right? paladin


Top
   
 Post subject:
PostPosted: Tue Apr 01, 2014 11:35 am 
Offline
2 BBL ''SuperSix''

Joined: Sun Mar 17, 2013 8:43 pm
Posts: 23
Location: portales
Car Model:
well that worked. I'm trying to make shifte linkage but which lever is what I was thinking the rear is 1 and reverse but not sure there is no information on these transmissions anywhere. Can anyone help me with this


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited