Man, it's dusty. Lol.
| Slant Six Forum https://slantsix.org/forum/ |
|
| remote control drivers mirror? https://slantsix.org/forum/viewtopic.php?t=55002 |
Page 1 of 1 |
| Author: | USAJon [ Mon Mar 31, 2014 2:13 pm ] |
| Post subject: | remote control drivers mirror? |
OK wanted a non remote but got a good deal on a manual remote. have it mounted in door but there is NO hole in door for the remote mount to go. I can see cutting a hole in the door panel but where in steel door ? pictures anyone. |
|
| Author: | USAJon [ Mon Mar 31, 2014 4:10 pm ] |
| Post subject: | |
http://smg.photobucket.com/user/jonwisp ... ary/mirror |
|
| Author: | Kidd [ Mon Mar 31, 2014 9:20 pm ] |
| Post subject: | |
You still need a pic? I can get you a pic of my Barracuda |
|
| Author: | USAJon [ Tue Apr 01, 2014 4:51 am ] |
| Post subject: | |
yes, I would appreciate that very much |
|
| Author: | USAJon [ Wed Apr 02, 2014 2:20 pm ] |
| Post subject: | |
can anyone send me to a link about mirror mount for remote on inside of door? |
|
| Author: | DusterIdiot [ Wed Apr 02, 2014 4:53 pm ] |
| Post subject: | It's... |
Quote: can anyone send me to a link about mirror mount for remote on inside of door?
If it's in a wing window car (1967-1972), the hole for the toggle is in the metal above the door card and just slightly forward of the post for the wing window...A 3/4" unibit should provide the right hole for mounting, hopefully you didn't lose the sheetmetal grommet the holds the backside against the door.
|
|
| Author: | Kidd [ Wed Apr 02, 2014 7:16 pm ] |
| Post subject: | |
Man, it's dusty. Lol. |
|
| Author: | DusterIdiot [ Wed Apr 02, 2014 7:23 pm ] |
| Post subject: | Interesting... |
Little forward from where it was on my '67 Signet (course that was a 4 door), and where is is located on the late Duster's (no wing windows). |
|
| Author: | Kidd [ Wed Apr 02, 2014 7:25 pm ] |
| Post subject: | |
This is a 67 Barracuda Notchback.....I was going to take a pic of mt Road Runner too...LOL |
|
| Author: | USAJon [ Wed Apr 02, 2014 9:51 pm ] |
| Post subject: | |
thanks I now can drill it out thrusday. |
|
| Author: | Kidd [ Wed Apr 02, 2014 9:56 pm ] |
| Post subject: | |
You will need to leave a flat spot so the remote dosent spin.Does your remote have a flat side? |
|
| Author: | USAJon [ Thu Apr 03, 2014 10:50 am ] |
| Post subject: | man that was 2easy |
http://smg.photobucket.com/user/jonwisp ... e%20mirror |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|