Slant Six Forum
https://slantsix.org/forum/

904/727 Throttle Lever Seal part #
https://slantsix.org/forum/viewtopic.php?t=55535		 Page 1 of 2
Author:  Greg Ondayko [ Fri Jun 06, 2014 5:21 am ]
Post subject:  904/727 Throttle Lever Seal part #
Hello Transmission Sages

I would Like to know a part # for the Throttle Lever Shaft Seal.. This seal is under the kickdown lever in the Valvebody...


I know these come with rebuild / reseal kits, but I want to buy them ala carte.

Please Do not give me an ATP part #.. I Bought 10 of them from rock auto and they are boxed wrong.



This is the Seal I am Looking for:
Image


Image


This Is what currently comes in ATP Part # TO-29 (they List this as The Seal pictured above.. but its not :-()
Image


Image


Any Alternative/ Equivalent part#'s in Timken, SKf, national Etc

Would be appreciated.

Greg
Author:  wjajr [ Fri Jun 06, 2014 6:45 am ]
Post subject: 
Greg, you probably could get one from a parts store, or better yet a local transmission shop for a few bucks.
Author:  Greg Ondayko [ Fri Jun 06, 2014 7:20 am ]
Post subject: 
Quote:
Greg, you probably could get one from a parts store, or better yet a local transmission shop for a few bucks.
Thank you WJAJR, But I am looking for a part# on these.

Greg
Author:  Dart270 [ Fri Jun 06, 2014 8:33 am ]
Post subject: 
The seal you received looks like it might be a front pump seal? If so, they look very nice. Also if so, I would happily buy some of yours, or order some from Rockauto.

Lou
Author:  Louise76 [ Fri Jun 06, 2014 9:29 am ]
Post subject: 
Oh DARN! I changed that seal in 2009, but could not find the part number in all my records on that car. I realize now that I will need that p/n for another 904 soon. I did see that I changed the seal when I had the oil pan off, and I cut a 2.5" hole in the floor above the lever for access. (Not a pristine car.) P.
Author:  Pierre [ Fri Jun 06, 2014 9:40 am ]
Post subject: 
Per the 70-71 parts manual, chrysler # 2466548 crosses to ATP 13308 per napa's site. The napa site picture seems similar to what you showed, $1.17. Some are listed on ebay as well.

Edit: I know you didn't want an ATP# but judging by the box you have ATP TO-29, not 13308. This sounds like a catalog issue not a misboxed issue.
Author:  wvenable [ Fri Jun 06, 2014 9:54 am ]
Post subject: 
I will be dropping by A&A next Wed. evening. I can pick Rick's brain -prolly has it in stock.
Author:  Greg Ondayko [ Fri Jun 06, 2014 10:52 am ]
Post subject: 
Quote:
The seal you received looks like it might be a front pump seal? If so, they look very nice. Also if so, I would happily buy some of yours, or order some from Rockauto.

Lou
I have 10 of them that I dont Need..

They look like wat you want But I think the diemensions are incorrect.

Check on the front Pump seal and then compare it to the measurements in my pics... If you can use them Then you can have a few.


Greg
Author:  Greg Ondayko [ Fri Jun 06, 2014 10:58 am ]
Post subject: 
Quote:
Per the 70-71 parts manual, chrysler # 2466548 crosses to ATP 13308 per napa's site. The napa site picture seems similar to what you showed, $1.17. Some are listed on ebay as well.

Edit: I know you didn't want an ATP# but judging by the box you have ATP TO-29, not 13308. This sounds like a catalog issue not a misboxed issue.

Problem is 13308 Does not exist on atp's Catalog / Inventory and When I bought many of these last Time I got atp to-29 and they were correct.

Atp's site even lists the Dimensions of to-29 as similar to what I have in the above pictures of the small seal.. Somebody goofed..


Greg
Author:  Pierre [ Fri Jun 06, 2014 11:07 am ]
Post subject: 
My local napa shows them in stock per the site. Assuming you don't have a napa near you - if they are the right ones, want me to buy you several and mail?
Author:  Rick Covalt [ Fri Jun 06, 2014 11:42 am ]
Post subject: 
Quote:
I have 10 of them that I dont Need.
I would buy 2 if they are front pump seals also.

Rick
Author:  Greg Ondayko [ Fri Jun 06, 2014 1:38 pm ]
Post subject: 
Quote:
My local napa shows them in stock per the site. Assuming you don't have a napa near you - if they are the right ones, want me to buy you several and mail?
thanks for the offer, but there are napas here too.. so I can get them from them.
Author:  Greg Ondayko [ Fri Jun 06, 2014 1:41 pm ]
Post subject: 
Quote:
I will be dropping by A&A next Wed. evening. I can pick Rick's brain -prolly has it in stock.
Rick is da man!
while you are there,

maybe see if you can get me all aluminum drums and rollerizied everything for the 904 for under $1000

:lol:

Greg
Author:  Greg Ondayko [ Fri Jun 06, 2014 1:46 pm ]
Post subject: 
Quote:
My local napa shows them in stock per the site. Assuming you don't have a napa near you - if they are the right ones, want me to buy you several and mail?

I wonder if that is correct... the picture looks a lot more like the shift lever seal rather than the throttle lever.. I will have to order a few in and see.

Greg
Author:  wvenable [ Fri Jun 06, 2014 1:54 pm ]
Post subject: 
Quote:
Quote:
I will be dropping by A&A next Wed. evening. I can pick Rick's brain -prolly has it in stock.
Rick is da man!
while you are there,

maybe see if you can get me all aluminum drums and rollerizied everything for the 904 for under $1000

:lol:

Greg


Yep, it is very depressing looking at all the stacks of goodies knowing that I can't afford most of it. You should see a stack of big block cross ram intakes when he gets a shipment from the foundry. First I want to cry -then I want walk out with one and see if he notices!
Page 1 of 2 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/