I have a 225 slant six out of a '69 Plymouth Valiant and am wanting to put it into my '77 Dodge D100 truck with a 3spd manual column shift. Do I need to get the clutch and flywheel for the Valiant or for the truck? Also, I looked up clutch kits for the Valiant and there is a 9 1/4" and 10", and the truck sizes are 10" and 11"...how do I know which size I need? For some reason Rock Auto didnt have flywheels for either vehicles...I thought this was strange.

_________________
-Brodie

1977 Dodge D100 stepside, slant six/3 on the tree
2002 Chrysler 300M Special (daily driver)

you need to match flywheel with bell housing then clutch to flywheel

Truck. If the starter is up high it's the 10" clutch. Flywheels generally aren't replaced, but should be resurfaced.

_________________
Joshua