| Slant Six Forum https://slantsix.org/forum/ |
|
| slant 6 wont fast idle https://slantsix.org/forum/viewtopic.php?t=55736 |
Page 1 of 1 |
| Author: | slantd150 [ Sun Jul 06, 2014 12:20 pm ] |
| Post subject: | slant 6 wont fast idle |
86 d150 slant 6 has a new carb I just put on and I cant get to fast idle. ive replaced the heat riser in hopes that would fix it but it didn't really help much. the only way I can get it to start is if I place a spring on the cam to hold it to where the idle screw contacts the cam other wise it really struggles to start and stalls. any help is greatly appreciated! |
|
| Author: | Fopar [ Sun Jul 06, 2014 12:34 pm ] |
| Post subject: | |
Carb?? whitch one, pictures would help. Richard |
|
| Author: | Reed [ Sun Jul 06, 2014 1:33 pm ] |
| Post subject: | |
Have you adjusted the choke linkage, the vacuum choke pulloff linkage, the fast idle cam linkage, the curb idle and fast idle speed screws, and made sure the choke thermostat is correctly attached? |
|
| Author: | slantd150 [ Sun Jul 06, 2014 4:25 pm ] |
| Post subject: | |
yes i have adjusted the screws but i dont know anything about adjusting the linkages heres the carb im dealing with <a href="http://s435.photobucket.com/user/mopardriver89/media/IMAG0668.jpg.html" target="_blank"><img src="http://i435.photobucket.com/albums/qq74/mopardriver89/IMAG0668.jpg" border="0" alt=" photo IMAG0668.jpg"/></a> |
|
| Author: | Reed [ Sun Jul 06, 2014 4:40 pm ] |
| Post subject: | |
Quote: yes i have adjusted the screws but i dont know anything about adjusting the linkages
Go HERE and click on the link to information about the Holley 1945.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|