Slant Six Forum
https://slantsix.org/forum/

2 Barrel with Webber Carb
https://slantsix.org/forum/viewtopic.php?t=56185		 Page 1 of 1
Author:  chongo25 [ Fri Sep 12, 2014 10:05 pm ]
Post subject:  2 Barrel with Webber Carb
I just picked this up and was wondering if there is an area to on the website I could look at so I can get some guidance on info when Installing. If there is any "tricks" or whatever to get better performance. I am planning to use it with stock exhaust and headers. It has a Lokar cable.

Image
Author:  Serj22 [ Sat Sep 13, 2014 6:26 am ]
Post subject: 
I told you on Facebook, lol.

Read through this:

http://www.slantsix.org/forum/viewtopic ... highlight=

I took several photos of my setup. I used the stock kickdown and modified the choke riser rod to work the kickdown.

And this:

http://www.slantsix.org/forum/viewtopic ... ight=weber
Author:  chongo25 [ Sat Sep 13, 2014 9:50 am ]
Post subject: 
Haha I know, I was trying to find it and couldn't. Thanks for the links I ll have to check them out. Quick question, what is the best way to strip the intake so I can repaint
Author:  Serj22 [ Sat Sep 13, 2014 1:46 pm ]
Post subject: 
Quote:
Haha I know, I was trying to find it and couldn't. Thanks for the links I ll have to check them out. Quick question, what is the best way to strip the intake so I can repaint
I glass beaded mine. That was pretty fast, otherwise aircraft paint remover. Works good, but don't touch it, and wear a mask. That stuff is nasty.
Author:  Wesola78 [ Mon Sep 15, 2014 12:02 pm ]
Post subject: 
Looks good, what model Weber is that? Just curious.
Enjoy,
Wes
Author:  chongo25 [ Thu Sep 18, 2014 4:05 pm ]
Post subject: 
Thanks for the suggestion. Sorry I haven't responded, been out of town. I have to check on the model number of the webber. I will post it tonight.
Author:  chongo25 [ Fri Sep 19, 2014 9:00 pm ]
Post subject: 
The model number is 11046
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/